Fujitsu P50XHA10U, P42HHA10A, P42HHA10W Specifying RGB Input Signal Code Setting For RGB2

Page 38

OTHER ADJUSTMENTS (FEATURES MENU) (Continued)

• Specifying RGB Input Signal (Code Setting)

for RGB2

You can use this option to specify and display the type of RGB input signal by code number.

Each time you press		or , one of the available choices appears in the following
sequence:
Auto		Manual
Auto:	Automatically displays the input signal to the optimum.
Manual: Selects RGB code number.
Press	to store.	“Code Setting” setting screen

*In Auto mode, the optimum resolution may not be set up automatically depending on the type of signal.

Select the type of signal when the image is not displayed properly.

However, note that when the type of signal is selected directly, the signal of other resolution may not be displayed properly.

•Displaying white over entire screen (White Screen)

You can use this option to display white over the entire screen to minimize phosphor burn-in.

Each time you press		or	, one of the available choices appears in the following sequence:
On		Off

Off: Does not display white.

On: Displays a white screen immediately.

Press to store.

• Setting Exhibition Mode (Exhibition Mode)

You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.

Each time you press		or	, one of the available choices appears in the following sequence:
On		Off

On: Sets up Exhibition mode.

Off: Sets up normal mode.

Press to store.

*In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.

*The setup will be cancelled when removing the power plug from the receptacle.

• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press		.
The “Information” screen will appear.
Mode:	Input mode appears at the upper right corner of the screen.
Freq. Scan Mode: Frequency scanning
Input Signal:	Video mode
Input Sync.:	Signal type	Information screen (Video Mode)

Freq.:	Frequency and polarity (fH, fV)
Preset No.:	RGB code number

Information screen (RGB Mode)

* On-screen information disappears if you do not take any action for about 60 seconds.

E-38

Image 38

Contents USER’S Manual Important Information Safety PrecautionsImportant Safety Instructions Power Insert the plug Pay Dealer to ensure Safety and EMCOr cleaning Fire Ult, and serious Cause From Consult your product dealerFeatures Handy Tips AccessoriesChecking Accessories InformationReference InstallationPerforms the installation Control Panel Right side of display Part Names and FunctionsDisplay Section Front Display Section Lower Part Description of Input Terminals Remote Control Precautions Using the Remote ControlPutting Batteries in the Remote Control To remove the cover, slide it Place two AA batteriesDisplay front Effective Range for the Remote ControlDisplay side Ferrite cores Connecting the Display to External EquipmentReceptacle Two big ferrite coresVCR or other external components See P Speaker Display Speaker optional Remote controlExample of Connection to External Components DVD playerVCR Bottom of Display Ex. P42VHA10Terminal DVD PlayerSatellite Tuner InputDVI-D Press when the power is on Turning the Power on and OFFPress on the remote control Basic OperationsMuting the sound Adjusting the VolumePress the Volume button RGB Input Mode Selecting Input ModeVideo Input Mode Press the buttons to select the input modeConvenient Functions Picture Mode Picture ModeOther Basic Operations On-screen information DisplayWatching Pictures on the Wide Screen Switching Between Screen SizesPress to select a desired picture mode PressScreen Size Aspect RatioCan be set when Fine is selected as the Picture Mode Adjustment MenuAdjustment Menu Press or to select Picture Adjusting Pictures Picture MenuPress to store Press when you finish PressTint. or to selectSetting Picture Mode Picture Mode Precision Setting for more advanced adjustmentCase of Load Setting Noise Reduction Noise ReductionStoring the setting of Picture Picture Memory Case of SavePress or to select Position Press , , or to change position valuesSetting Range Adjusting Screen Position PositionAdjusting Screen Size Size Video, S-video mode Comp.video mode RGB modePress or to select Audio Adjusting Audio Audio MenuPress or to adjust the balance Press or to select BalanceAdjusting Volume Balance Balance Adjusting Treble TrebleAdjusting Bass Bass Setting Loudness LoudnessPress or to select On Screen Menu Other Adjustments Features MenuPress or to select Features Press or to select LanguageAdjustment Features setup screen has the following 5 optionsFunction On Screen MenuSelecting S-video Mode S-video Input Setting the Input TerminalsSelecting Video Mode Video Input Selecting D-SUB Input D-SUB InputSelecting input terminals Audio Input Other SettingsFor other then RGB1 Black WhiteScreen Orbiter setting screen Minimizing phosphor burn-in Screen Orbiter For RGBDisplaying white over entire screen White Screen Specifying RGB Input Signal Code Setting For RGB2Setting Exhibition Mode Exhibition Mode Displaying System Status InformationDisplays the message of having completed the initialization Press To select FactoryPress or to select the Yes Options Factory Settings Specification ModelEN61000-3-3 Vp-p/75 VIDEO2 INPUTS-video inputRegulation --- P50XHA10W Regulation --- P50XHA10A/P50XHA10U Regulation --- P42VHA20W/P42VHA20A Regulation --- P42VHA20U Handy Tips Cleaning and MaintenanceProblem Action