Equinox Systems RS232-RS485 Electromagnetic Compatibility EMC Compliance, ESD Points to remember

Page 6

Electromagnetic Compatibility (EMC)

Compliance

The ‘RS-232 to RS-485 Convertor’ is a CE Approved Product. It is designed for use in an ESD controlled environment i.e. development or production. This means, therefore, that the user must ensure that there is no possibility of damage from electrostatic discharge (ESD). Since the devices and equipment to which this product is likely to be connected may well themselves be susceptible to ESD, this should not pose any difficulty.

For example, if you are handling microcontrollers and EEPROMS etc. then you will already be used to appropriate precautions, such as the use of anti-static mats, wrist straps and so on. You should treat your ‘RS-232 to RS-485 Convertor’ with the same care as you would these type of device. Always ensure that you are not yourself carrying a static charge before handling the product. Wearing an earthed anti-static wrist strap is recommended.

Equinox have taken great care in designing this product to be compliant with the European EMC directive. When using the equipment be sure to follow the instructions provided. Although RF emissions are within prescribed limits, care should be taken if you are using the product near to sensitive apparatus. If you experience any difficulty please refer to Equinox technical support.

ESD Points to remember

Work in a static-free environment.

Wear an earthed wrist strap when handling either the programmer and/or any programmable device.

RS232-RS485 Convertor Manual V1.02 28/06/01

v

Image 6
Contents User Guide Contents Copyright Information Equinox Warranty Information RS232-RS485 Convertor Manual V1.02 28/06/01 Electromagnetic Compatibility EMC Compliance ESD Points to remember? E-mail Technical Support? Internet Web Site ? FaxSoftware Associated Product DocumentationHardware Product Documentation Downloading up-to-date documentation and softwarePage System Contents OverviewRS232-RS485 Convertor End Panels Number Description TypeRS-232 to RS-485 Status LED Indicators Input Power Supply RequirementsLED Colour Status Description J1 RS-232 Serial Communications Port J1 Pin-outJ2 & J4 Isolated RS-485 Connectors J2 & J4 RS485 Connector Pin-outsPRO101 Multi-Channel RS-485 Operation OverviewPRO101 Hardware Installation Instructions PRO104 4 Channel Eurocard Rack Production ISP System PRO104/108 Hardware Installation Instructions

RS232-RS485 specifications

Equinox Systems RS232-RS485 is a crucial device in the realm of industrial communication, facilitating the seamless transition between RS232 and RS485 protocols. This converter is essential for applications where devices equipped with RS232 need to communicate over longer distances or in noisy environments where RS485 excels.

One of the main features of the Equinox Systems RS232-RS485 converter is its ability to support long cable runs. RS232 typically allows communication over short distances, typically up to 50 feet, while RS485 can extend this reach to over 4000 feet. This flexibility is vital in large industrial settings, where devices may be located far apart.

Another significant feature is its robust data transmission capabilities. RS485 is well-known for its differential signaling, which enhances noise immunity and allows for reliable communication in electrically noisy environments. The converter supports multi-drop configurations, enabling multiple devices to be connected on the same network without signal degradation.

The technology employed in the Equinox Systems RS232-RS485 converter includes advanced signal processing, which ensures high data integrity and reduces error rates during transmission. It typically operates at baud rates up to 115200 bps, making it suitable for various data-intensive applications.

In terms of compatibility, this converter is designed to work seamlessly with various devices, including PLCs, industrial sensors, and computers. Its ease of use is enhanced by features like auto-sensing, which automatically adjusts to the different communication settings of connected devices.

The design also prioritizes durability, featuring robust enclosures that protect against dust and moisture. This makes it suitable for operations in challenging environments, such as manufacturing plants and outdoor installations.

Additionally, the Equinox Systems RS232-RS485 converter is often equipped with LED indicators that provide real-time feedback on data transmission status, aiding in diagnostics and maintenance.

In summary, the Equinox Systems RS232-RS485 converter stands out for its versatility, reliability, and ease of integration into existing systems. Whether in industrial automation, building management, or extensive network systems, its ability to facilitate effective communication between devices using different protocols makes it an invaluable asset in modern communication solutions.