Tatung TDR-22XX Set up motion detection zone, Set up the Misc options Motion beep

Page 22

TATUNG TDR series Digital Recording System

Page

18

 

 

 

3.5 Motion

This function button (as shown below) can be used to setup the motions.

Note: If no detection zone was defined, system will recognize the whole windows as a detection zone.

Note: After the camera is motion activated in Schedule Setup Mode and after the detect zone is set, this channel will be motion-

beactivated in the define area. If anything falls in this area, the detected motion will be seen in a lot of small blue squares. And red wording “MOTION DETECTION” will be blinking.

Click on this button to setup the motion, the screen display as the below (Please following the 4 steps)

1.Select channel

Select the channel from 1 to 16.

2.Set up motion detection zone.

Setup the motion detection zone for each channel by click and drag. It would be seen in red square (Maximum 10 areas per camera).

3.Set up the MISC options.

Motion beep

In motion recording mode, BEEP sound (if the speaker was included in the system) can be activated/inactivated by checking the box or not. Beep time can also be adjusted by dragging the cursor.

Image 22
Contents TDR-22XX series Digital Recording System Tatung Company of AMERICA. INCTatung TDR series Digital Recording System Contents Tatung TDR series Digital Recording System Installation Connect the Cables Turn on the SystemSequence Button Company LogoDATE/TIME Window ButtonFull SCR Button Setup ButtonBackup Button Motion ButtonImage Display window Channel display windowChannel Camera name Recording status lampSelection of Split screen Motion Tracker Mode Switch button ON/OFF ButtonSpeed ChannelSchedule ColorT/Z camera protocol PasswordExit Channel Setup the ChannelCH01 Setup the name HereActivate Group ScheduleSelect the Group Schedule the Recording DATE/TIME and DVR Shutdown TimeActivate the camera Select the Recording modeSet up another group Continuous recordingSpeed Misc Color Select channelSet up the Misc options Motion beep Set up motion detection zoneMotion Sensitivity Clear all blockP/T/Z Protocol Password ∙ Password§ Delete ∙ Remote username/password§ Sign up § Edit User∙ Hide Cameras ∙ Restart WindowCheck the box of sound Adjust the Play Sound DelayVoice Check on the box of the channel you want to activateExit Save Disk Date/TimeLog PrintMute Box Channel playback window∙ Mute ∙ Time IndicatorChannel play back window ∙ Display one specific channel onlyButtons on Play Back Console From-Time selection Date/TimeDate selection To-Time selectionExit List item LogTime Playback or CloseImage type Save DiskCut K. or noPrint Print or CancelCut Print Storage Capacity ∙ Cancel ∙ Auto Backup∙ AVI Backup ∙ ExplorerScheduled Backup Auto BackupScheduled Backup Option Immediately backup option CloseAVI Backup Cancel ExplorerCamera Selection Panel Camera Control∙ PAN/TILT Control Panel ∙ ZOOM/FOCUS/PRESET Panel Appendix a TDR-2204 /9 TDR-2209 /16 TDR-2216 Camera InputsSoftware TDR-22xx Series image size80 GB TDR-22xx Series Storage and Recording time40 GB 120 GBAppendix B