PREPARING THE INSTALLATION
Before proceeding with the installation of this screen, be sure to read and understand all the installation and operating instructions thoroughly.
All electrical wiring installations must conform to local and national codes and should be performed by qualified service personnel.
There are no
Preparation
Specifications regarding the individual screen dimensions, weight, mounting type, and controls are provided by the factory when the unit is ordered. Before beginning the installation:
Check the specifications for the type of mounting and switch control to be used.
Ensure that the mounting area and electrical connection are prepared.
Check the size and weight of the screen to be installed so that you can plan for the number of people required for the mounting procedure. You need at least two people to mount the smaller screens; more are needed for larger, heavier screens.
You will need:
Enough ladders for the personnel supporting the screen during the mounting process
A level
Fasteners appropriate for the surface on which the screen is being mounted (See instructions for the type of mount for recommendations.)
Caution
During installation, do not place the unit on an unstable cart, stand, table, or ladder. The unit may fall, causing injury to a child or adult and damage to the unit.
4 | Stewart Filmscreen Corporation |