Stewart Filmscreen Corp C installation instructions Unpacking

Page 7

Unpacking

Warning!

Failure to remove the batten lock-down screws can result in permanent damage to the screen.

1.Remove the outer plastic covering and white wrapping paper surrounding the screen case.

2.Do not remove the wrapping paper surrounding the screen roller. You should remove it only after the unit is hung and all electrical connections have been made.

3.Remove the batten lock-down screws located on the back side of the case.

Luxus A/SR-1 Electriscreen: Owner’s Manual

Image 7

Contents To the Owner ElectriscreenStewart Filmscreen Corporation Luxus a / SR-1 Electriscreen ContentsAbout your Luxus a Series Electriscreen To the OwnerAbout your Luxus SR-1 Series Electriscreen Hdtv Format 169/1.781 Aspect Ratio Preparation Preparing the InstallationUnpacking Ceiling or top mount installation Wall installationHanging the Case Recessed or concealed mount Suspended installationElectrical connection box Electrical HOOK-UPPreparing the connection Installing the high voltage switch control standardMaking the connections Making the connection Installing the screen trigger interface optionLow voltage 3-button switch wiring Installing the low-voltage 3-button switch optionInstalling the wireless remote control option Infrared remote control wiring Installing the infrared remote control optionOperating the Screen Adjusting the Screen ExtensionUnderside view of Luxus Modifying the extension of the screenGeneral maintenance Screen Care and CleaningReplacement parts and service Problem description Probable cause Action to take Troubleshooting