Teac PortaDVD user manual Front and Right Panels

Front and Right Panels

Figure 2. Front and Right Panels

On/Busy indicator: This LED indicator lights up during seek/data transfer and flashes to indicate that the drive is in seek, play, or read mode.

Eject button: Press the Eject button to release the disc tray from the drive. Gently pull the disc tray to open it, or push to close. Certain

software can control disc eject.

Caution: Do not forcefully pull open or close the disc tray by hand or you may damage the unit.

Emergency eject mechanism: To eject a disc when the standard means fail, insert a slender, straight tool (such as a straightened paper clip) into the emergency eject hole. Press firmly to partially extend the disc tray.

Power supply selection switch: Use this switch to set the power source for the PortaDVD drive. Refer to “Power Sources/Battery” on page 3.

Line out audio/ headphone jack: You can connect headphones or external speakers to this 3.5 mm stereo mini-jack. See “Connecting to Audio Equipment” on page 6 for more information.

AC Power input: Connect the AC adapter to this plug.

4 TEAC PortaDVD User’s Manual