Teac user manual Connecting the PortaDVD, Connecting to Audio Equipment

Page 12

Connecting the PortaDVD

This section explains how to connect the PortaDVD to an IBM PC or compatible portable computer that utilizes PCMCIA card technology. The procedure begins by connecting the appropriate cables to the Por- taDVD. Please read the following instructions thoroughly; the installa- tion procedure varies depending on the operating system you are using.

3.Connect the PCMCIA cable plug to the interface connector on the side panel of the PortaDVD (Figure 3).

4.Do not insert the PCMCIA card into the computer at this time.

With Windows 98/Me/2000, the PortaDVD enables you to perform a “hot swap” installation while the computer is powered on. You will insert the card for the first time later as part of the software installation procedure.

5.Connect the AC adapter cable to the AC power input on the drive (Figure 3).

PCMCIA cable

AC adapter cable

headphones cable (not included)

Figure 3. Connecting Cables

Connecting to Audio Equipment

The PortaDVD outputs a line-level audio signal from the headphone jack. You can connect a 3.5 mm stereo mini-plug to the headphone jack (see Figure 3 on page 6) to enjoy digital audio.

6

TEAC PortaDVD User’s Manual

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PortaDVD User’s Manual Page FCC Radio Frequency Interference Regulations Copyright and Trademark InformationSafety Information Disc tray extendedTable of Contents List of Figures Introduction Recommended System RequirementsUnpacking Your PortaDVD Teac PortaDVD User’s Manual this document Power Sources/Battery Operating OrientationFront and Right Panels Front and Right PanelsLED Connecting the PortaDVD Connecting to Audio EquipmentDetecting the Pcmcia Card Double-click the System icon on the Control PanelTeac PortaDVD User’s Manual Installing the Pcmcia Card Using the Windows PC Card Wizard Open the Windows Control PanelOn the Control Panel, double-click the PC Card Pcmcia icon Click the Next buttonSystem Settings Change Click the Finish buttonInstalling the PortaDVD Driver Using the Windows Wizard For Windows 98/Me/2000Click the Next button to search for the driver Click the Next button Installing and Using DVDExpress Installing DVDExpressDouble-click the file icon for Setup.exe System displays the Software Licensing Agreement on Installing DVD Express Click the Finish button. The installation is complete Starting DVDExpressTo launch DVDExpress, select Handling Discs Loading and Ejecting DiscsLoading a Disc Press the Open/Eject button on the front panelEjecting a Disc Carefully remove the discSpecifications DVE28ETechnical Support North AmericaEurope Japan, Asia, Middle East
Top Page Image Contents