Emerson EWD2202 owner manual For TVs with Component Video in Jacks

Page 15

FOR TVs WITH COMPONENT VIDEO IN JACKS

Use a component video cable (commercially available) in place of the yellow video cable to enjoy higher qual- ity pictures.

The component video connection only supplies video (picture) in the DVD mode of the DVD/VCR. Therefore, in order to use the VCR features or view TV channels at the DVD/VCR, you still need to either connect the RF coax- ial cable between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable as described earlier (Fig. 1). To connect the supplied RF coaxial cable, see “DVD/VCR TO TV CONNEC- TION” on page 14.

A/V-compatible

or wide screen TV

To COMPONENT VIDEO

INPUT jacks

To COMPONENT VIDEO

To Right (red) and Left (white)OUT jacks AUDIO INPUT jacks

To Right (red) and Left (white)

AUDIO OUTPUT jacks

		DVD/VCR	COMPONENT
		OUT	COMPONENT
		IN	VIDEO OUT
ANT - IN	L		Y
	L	DVD/VCR	Y
	AUDO	AUDIO OUT
	R	L	Cb	S-VIDEO	DIGITAL AUDIO OUT
	R		Cb	OUT	PCM / BITSTREAM
ANT - OUT					COAXIAL
CH3 CH4	VIDEO	R	Cr

[Fig. 3]

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS SUCH AS MD DECK OR DAT DECK

Use an audio coaxial digital cables (not included) for the audio connections.

Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.

Amplifier equipped with digital

input jacks, MD deck, DAT deck, etc.

Notes

	DVD/VCR		COMPONENT
	OUT		COMPONENT
	IN		VIDEO OUT
ANT - IN	L		Y
	L	DVD/VCR	Y
	AUDO	AUDIO OUT
	AUDO				DIGITAL AUDIO OUT
	R	L	Cb	S-VIDEO	DIGITAL AUDIO OUT
	R	L	Cb	OUT	PCM / BITSTREAM
ANT - OUT					COAXIAL
CH3 CH4	VIDEO	R	Cr

	To COAXIAL DIGITAL	To COAXIAL DIGITAL
		AUDIO OUT jack
	AUDIO INPUT jack
		[Fig. 4]

¡The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

¡Be sure to turn off the power to all components in the system before connecting another component. ¡Refer to the Owner’s Manuals for the components to be connected to the DVD/VCR.

¡Set Dolby Digital and DTS to off for audio output in the setup mode. Playing a DVD disc using incorrect set- tings may generate noise distortion, and may also damage the speakers. (See page 36 to set Dolby Digital and DTS to on)

– 15 –

EN

1L25

Image 15

Contents EWD2202 Laser Safety Important Safeguards Refers to playback of video cassette tapes Supplied AccessoriesSymbols Used in this Manual About CopyrightIndice Table of ContentsDVD Mode FeaturesVCR Mode PrecautionsFollowing discs cannot be played back on this DVD/VCR About the DiscsPlayable Discs ExampleOperating Controls and Functions Button DVD mode Number Buttons DVD modeVCR mode Display Button DVD modeAC Power Cord Play Button DVD modePause Button DVD mode SKIP/CH. Buttons DVD modeLoading the Batteries DisplayDisplays During OperationSwitching to VCR Mode VCR/DVD SwitchingDVD/VCR to TV Connection SwitchConnecting to a TV HookupsFor TVs with Component Video in Jacks Dolby Digital DTS decoder Automatic Channel SET UP SetupClock SET UP To Change the ON-SCREEN Language¡To go back one step, press the REW button Search Functions This feature allows you to play a tape over and overPlayback Function Normal PlaybackPage Page Display button on Special FeaturesStatus will appear when you press Stop Copying a Video TapePlaying a DVD Video Or AN Audio CD Using the DVD MenusPlaying a Disc Auto RewindStepping Through Frames Using the Title MenuPausing Playback or Displaying a Still Picture Resuming Playback from Point Where Playback StoppedPlaying from a Desired Title or a Chapter Fast FORWARD/REVERSESlow Motion Starting from a Desired TrackCall back the marker Starting from a Desired Time CountMarker Set the marker¡The selected section will be Played back repeatedly RepeatYou can define a section to be played back repeatedly ¡The starting point a will then be Repeat SelectedZoom Playback When a Track is selected When an Album is selectedPlaying AN MP3 Disc Playing a Desired Track From AN MP3 Disc Playing AN MP3 Disc in a ProgramPlaying AN MP3 Disc Randomly Settings Changing the Audio Language or Sound Mode¡The current audio status will appear at the top Changing the Camera Changing the Subtitle LanguageChanging the ON-SCREEN Display Black Level SettingsLanguage Settings Changing the Setup ItemsAuto Power OFF Default on Display SettingsWhen playing a disc with copyright protection Audio SettingsParental Lock All parental lock is cancelledLanguage Country code Language Code ListProblem Corrective Action Troubleshooting GuideDisc Handling Handling PrecautionsSpecifications Controles DEL Funcionamiento Y SUS Funciones Botó n Output Botó n Title Botó n SetupBotó n Mode Botó n Search Mode Modo DVDBotó n VCR Botó n VDR/TVPosició n VCR Botó n PlayCambio AL Modo VCR Cambio DE VCR/DVDPreparació N ConexionesReproducció N DE UN Disco Preparació N DE RelojReproduciendo UN DVD Video O UN CD Audio Tel 0VMN03017H9200UD