PROGRAM (Audio CD)
CD
1Press the MODE button in stop mode.
¡The program screen will appear.
PROGRAM TIME 0:00:00 1/1
START: | PLAY | DELETE: CLEAR |
RANDOM: | MODE | EXIT: RETURN |
2Press the Number buttons to enter the desired track numbers.
| PROGRAM TIME 2:07:43 | 1/1 |
¡50 programs can be displayed | 02 05 07 04 10 14 06 15 21 | 08 |
at once on the screen. Press | 20 28 10 25 35 12 30 42 11 | 34 |
49 16 40 58 18 45 63 01 03 | _ |
“L” to go to the next page.
START: | PLAY | DELETE: CLEAR |
RANDOM: | MODE | EXIT: RETURN |
3Press the PLAY button.
¡Playback will start in the programmed order.
¡While the program is being played back, the STOP button works as follows.
¡Press the STOP button once and then press the PLAY button again. Playback will restart from the point where the STOP button was pressed. (Program continued)
ZOOM PLAYBACK
(enlargement on-screen)
DVD
Images can be enlarged on the screen to your taste.
1Press the ZOOM button during playback.
¡The image will be enlarged at the center of the screen.
¡Pressing the ZOOM button cycles the zooming images in two steps.
ZOOM [x2] | ZOOM [x4] | ZOOM [OFF] |
2When the cursor (K/ L/ s/ B) button is pressed during zoom play, the part to be zoomed moves.
¡The zooming frame can be moved from the center 4 steps to the right, 4 steps to the left, 4 steps to the top, and 4 steps to the bottom when times 2 zoom- ing. The frames will move 6 steps when times 4 zooming.
¡The current position will be displayed on the right- bottom of the screen. Press the ENTER button, and the display will disappear.
TO CLEAR THE PROGRAM
1Press the STOP button twice, and the pro- gram will be cleared.
Notes
¡Adding programs is not possible during program playback. You must stop the current playback before such operations can be carried out.
¡Press the CLEAR/C.RESET button to cancel a pro- gram. The most recently entered program will then be deleted.
¡Up to 99 programs can be entered.
¡Playback from a desired track and random playback are not available during program playback.
¡Program settings will be cleared when the power is turned off or the disc loading tray is opened.
¡Press the MODE button to check the programmed setting.
¡The programs will be cleared when you turn the power off.
Note
¡Zooming function does not work while the disc menu is being shown.
– 28 – | EN |
1L25