Emerson EWD2202 owner manual Operating Controls and Functions

1. Disc loading tray

2. DVD OUTPUT Light (Green) [page 13]

This light appears when the DVD/VCR is in DVD mode. You can only watch DVDs when the green DVD OUTPUT Light is on. To make the green DVD OUTPUT light come on, press the DVD button on the remote control or the OUTPUT Button on the front panel.

3. VCR OUTPUT Light (Green) [page 13]

This light appears when the DVD/VCR is in VCR mode. You can only watch tapes when the green VCR OUTPUT light is on. To make the green VCR OUTPUT light come on, the VCR button on the remote control or the OUTPUT Button on the front panel.

4. CASSETTE COMPARTMENT

5. REC/OTR Light [page 20] Lights up during recording.

6. TIMER SET Light [page 21]

This light glows when the DVD/VCR is in standby mode or off for a timer recording or during a One- Touch Recording. It flashes if the TIMER SET but- ton is pressed for a timer recording, but there is no

OPERATING CONTROLS AND FUNCTIONS

FRONT PANEL

1 2 3 4 5 6 7 8 9

REMOTE CONTROL

	DVD OPERATION
OPEN/CLOSE	STOP SKIP/REV PLAY FWD/SKIP

OUTPUT

25		23	21
26	24	22	20

				POWER
				VIDEO
VCR OPERATION			CHANNEL
			TIMER	L
			SET
			VCR/TV	AUDIO
STOP/EJECT REW	PLAY	F.FWD REC/OTR	CST.IN	R

19	17	15	13	11
18	16		14 12	10

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

POWER SPEED AUDIO

1 2 3

SKIP/CH.

4 5 6

VCR/TV

7 8 9

+100 SLOW

0 +10

DISPLAY DVD VCR PAUSE

PLAY

STOP

RECORD

MENU

ENTER

SETUP TITLE RETURN

MODE ZOOM SEARCH CLEAR/

MODE C.RESET

SUBTITLE ANGLE REPEAT A-B

			tape in the DVD/VCR. It flashes when all timer
	56	7.	recordings or One-Touch Recordings are finished.
			POWER Button [page 17]
			Press to turn the power on and off.
55		8.	POWER Light
			Lights up when the power is on.
		9.	VIDEO In Jack
	54		Connect a video cable coming from the video out
			jack of a camcorder, another VCR, or a video source
53		10.	(laser disc player, video disc player, etc.) here.
	52		AUDIO In Jacks
			Connect audio cables coming from the audio out jacks
51
	50		of a camcorder, another VCR, or an audio source here.
49		11.	TIMER SET Button [page 21]
			Press to put the DVD/VCR into standby mode for a

timer recording.

12. CASSETTE IN Light [page 19]

48 Lights up when a cassette is in the DVD/VCR.

4713. VCR/TV Light [page 17]

46	Lights up when the DVD/VCR is in the VCR posi-
	tion, and goes off when it is in the TV position.

4514. CHANNEL Buttons [page 17]

44	In VCR mode, press to change TV channels on the
43	DVD/VCR; press to adjust the tracking during nor-
42	mal or slow motion playback; press to remove verti-

cal jitter in a Still picture.

15.REC/OTR Button (VCR) [page 20]

Press once to start a recording. Press repeatedly to start a One-Touch Recording.

16.F.FWD Button (VCR) [page 17]

Press to rapidly advance the tape, or view the picture rapidly in forward during playback. (Forward Search). When setting program (For example:setting clock or timer program), press to determine your selection and proceed to the next step you want to input. Press to determine the setting modes from the on screen menu. Press to add or delete channel num- bers during channel preset.

17.PLAY Button (VCR) [page 17]

Press to begin playback. Press to enter digits when setting program (For example: setting clock or timer program). Press to select the setting modes from the on screen menu.

18.REW Button (VCR) [page 18]

Press to rewind the tape, or to view the picture rapid- ly in reverse during the playback mode (Rewind Search). Press to cancel a setting of timer program. Press to correct digits when setting program (For

– 9 – EN

1L25