Widescreen Viewing Modes (Con’t)
Accessing Widescreen Viewing Modes using OSD
You can also use the OSD menu to access the same wide- screen and zoom mode functions. To access these modes using OSD:
1.Press the MENU +/- keys on the remote or the front control panel.
2.Make sure that the following “Picture” OSD menu is displayed.
3.Use the MENU +/- keys to navigate to SCREEN WIDTH and use the ADJ +/- keys to switch between 4:3, 16:9 or PANORAMA.
4.Use the MENU +/- keys to navigate to ZOOM and use the ADJ +/- keys to switch between zoom 1,2 or 3. Please note that this function is not accessible unless the SCREEN WIDTH is set to “16:9”.
On-Screen Display (OSD) Settings
Accessing OSD Settings Menu
You can set various OSD display settings from the OSD menu.
1.Press the MENU +/- keys on the remote or the front control panel.
2.Use the ADJ +/- keys to navigate to “OTHER” OSD
OSD Timeout
Turns on OSD timer when set to ON. When set to ON, the OSD will automatically disappear from the display if no key action is detected for the set number of seconds. If set to OFF, then OSD will remain on the screen.
OSD Time Setting
Sets the number of seconds the OSD will remain active on the display before turning itself off. OSD TIMEOUT must be set to ON for this setting to function.
OSD Brightness
Sets the brightness level of OSD screen between 1 and 10.
OSD Background
You can set the OSD menu’s background to transparent or with a blue background. Set to OFF if you want a transparent setting. Set to ON if you want a blue background.
Note: To prevent permanent
ViewSonic VPW505 | 17 |