ViewSonic VPW505 manual For Component Video, Geometric Adjust

Page 24

For Component Video

Accessing Picture Adjustment Mode

Various picture adjustments can be set using the Picture Adjustment OSD menu. To access the OSD menu:

1.Press the MENU +/- keys on the remote or the front con- trol panel.

2.The first menu displayed is the PICTURE menu. Make sure that the “Picture” OSD menu is displayed.

3.Use the MENU +/- keys to move up and down to choose the option you wish to adjust. An explanation of each adjustment is listed below.

4.Use the ADJ +/- keys to change the setting.

Notes:

„These controls are avail- able when input selection is set to: Component 1 and Component 2 inputs.

„To restore picture settings to the factory defaults, simply press the RECALL key from the remote con- trol.

CONTRAST

Adjust Contrast to increase the level of “white” in the video picture. Increasing contrast will make white areas of the video picture brighter. Contrast works in conjuction with BRIGHTNESS.

BRIGHTNESS

Adjust brightness to enhance the level of dark areas in the video picture such as night scenes and shadow scenes. Increasing brightness will make dark areas more visible.

COLOR

Use color to adjust the color saturation of the video picture. Increasing color will make the color more intense. Reducing color setting will make the color less intense.

TINT

Use tint to adjust the color of fleshtones. Increasing the tint setting will shift the picture with more cyan (more green appearance). Decreasing the setting will shift the picture with more magenta (more red appearance).

SHARPNESS

Use sharpness to adjust the amount of detail enhancement to the video picture. Increase the setting will enhance the edges of objects in the video picture. Decreasing the setting will reduce enhancement.

COLOR TEMPERATURE

Select the color temperature for white balance. There are four settings to choose from: (1) 6500D - sets the white balance to 6500D; (2) LOW - sets to 5400K; (3) MID - sets to 9300K; (4) HIGH - sets to 13800K

CLOCK PHASE

Use clock phase to fine-tune the display to perfectly synchronize the video’s signal source. This function is not applicable in this mode.

SCREEN WIDTH

Use to change various screen width modes. See page 16 for more information.

ZOOM

Use to change various digital zoom modes. See page 16 for more information.

GEOMETRIC ADJUST

Use to access Geometric Adjust sub-menu. See page 23 for more information.

Notes:

1.Each of the (4) color temperature settings may not be exactly equal to the temperature setting as defined; however, it will be approximately close.

22ViewSonic VPW505

Page 23 Page 25
Image 24
Page 23 Page 25
Contents VPW505 Contents For Your Records Package Contents Product Features „ Quiet Fanless Operation„ SRS Sound Processing Understanding Your Display Swap WideConnecting the Display Connecting a DVD PlayerUsing Component Video Input Using S-Video InputConnecting a Hdtv Decoder Set-Top Box Using RGB InputUsing the Subwoofer Out Connecting a Subwoofer Note Connecting a PC Using RGB or DVI Video InputPowering on / OFF Selecting Signal SourceOperating the DISPLAY-BASICS Adjusting Sound Volume Using MuteWhat is Digital Television or DTV? What is the Difference Between HDTV, EDTV, and SDTV?Running Hdtv Understanding HdtvWhat is Down-Convert? Advanced Functions Picture-In-Picture PIP / Split ScreenAccessing PIP and POP Modes using OSD Picture-In-Picture PIP / Split Screen Con’tPIP On/Off Input Source Selection PIP Window Position PIP Window SwapFor 43 Aspect Ratio Square Content For Widescreen ContentWidescreen 169 Aspect Ratio Viewing Modes Understanding Widescreen ModesOn-Screen Display OSD Settings Accessing Widescreen Viewing Modes using OSDAccessing OSD Settings Menu Widescreen Viewing Modes Con’tSleep Timer Settings Setting Sleep Timer Using OSDSetting Sleep Timer Using Remote Control Sleep Timer On/OffSound Adjustments Setting Output Using OSDSound Adjustments Using OSD Switching OFF Built-In SpeakersSignal Frequency Information Display When Using AV1 and AV2 InputsWhen Using Component 1 & 2 Inputs When Using RGB & DVI InputsAdjusting Picture Accessing Picture Adjustment ModeFor AV / S-Video Geometric Adjust For Component VideoAccessing Geometric Adjust Mode For Component Video Con’tFor RGB / DVI Specifications Pin Assignments For D-SUB Connector In / Loop Out Pin Assignments For 24 Pin DVI ConnectorDigital OnlyRGB/DVI For Vesa Standard Maximum Resolution Dimensions Without Stand With StandPackage Dimensions WeightPower Management Mode Sync Video Emission RequirementWall Mount Option Rear ViewConnecting to TV or Cable TV Important Safety Instructions Outdoor Antenna GroundingAppendix TV / Cable TV ConnectionsRemote Control Using Remote Control Using Front Panel & OSD MenuChanging Channels TV Tuner Settings Accessing the TV Settings MenuUsing Quick View on Remote Control Quick ViewFavorite Channel and Channel Lock Settings Favorite Channel / Channel LockAccessing V-Chip Parental GuideParental Guide Table Passcode Setting OverviewChanging the Passcode Adjusting Picture For TVSymptom Possible Cause Remedy Troubleshoot Common ConditionsCustomer Support = FAXLimited Warranty How to get serviceViewsonic Plasma Display Limitation of implied warrantiesUSA Important Safety Instructions Risk of Electric ShockCleaning and Maintenance Front Panel Cleaning InstructionsCabinet Cleaning Instructions Avoid Still ImagesCompliance Information for Canada
Top Page Image Contents