ViewSonic VPW505 manual Adjusting Picture, For AV / S-Video, Accessing Picture Adjustment Mode

Page 23

ADJUSTING PICTURE

For AV / S-Video

Accessing Picture Adjustment Mode

Various picture adjustments can be set using the Picture Adjustment OSD menu. To access the OSD menu:

1.Press the MENU +/- keys on the remote or the front con- trol panel.

2.The first menu displayed is the PICTURE menu. Make sure that the “Picture” OSD menu is displayed.

3.Use the MENU +/- keys to move up and down to choose the option you wish to adjust. An explanation of each adjustment is listed below.

4.Use the ADJ +/- keys to change the setting.

Notes:

„These controls are avail- able when input selection is set to: AV1 and AV2

(S)inputs.

„To restore picture settings to the factory defaults, simply press the RECALL key from the remote con- trol.

CONTRAST

Adjust Contrast to increase the level of “white” in the video picture. Increasing contrast will make white areas of the video picture brighter. Contrast works in conjuction with BRIGHTNESS.

BRIGHTNESS

Adjust brightness to enhance the level of dark areas in the video picture such as night scenes and shadow scenes. Increasing brightness will make dark areas more visible.

COLOR

Use color to adjust the color saturation of the video picture. Increasing color will make the color more intense. Reducing color setting will make the color less intense.

TINT

Use tint to adjust the color of fleshtones. Increasing the tint setting will shift the picture with more cyan (more green appearance). Decreasing the setting will shift the picture with more magenta (more red appearance).

SHARPNESS

Use sharpness to adjust the amount of detail enhancement to the video picture. Increase the setting will enhance the edges of objects in the video picture. Decreasing the setting will reduce enhancement.

COLOR TEMPERATURE

Select the color temperature for white balance. There are four settings to choose from: (1) 6500D - sets the white balance to 6500D; (2) LOW - sets to 5400K; (3) MID - sets to 9300K; (4) HIGH - sets to 13800K

CLOCK PHASE

Use clock phase to fine-tune the display to perfectly synchronize the video’s signal source. This function is not applicable in this mode.

SCREEN WIDTH

Use to change various screen width modes. See page 16 for more information.

ZOOM

Use to change various digital zoom modes. See page 16 for more information.

Notes:

1.Each of the (4) color temperature settings may not be exactly equal to the temperature setting as defined; however, it will be approximately close.

ViewSonic VPW505

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents VPW505 Contents For Your Records Package Contents „ SRS Sound Processing Product Features„ Quiet Fanless Operation Understanding Your Display Wide SwapUsing S-Video Input Connecting the DisplayConnecting a DVD Player Using Component Video InputUsing RGB Input Connecting a Hdtv Decoder Set-Top BoxUsing the Subwoofer Out Connecting a Subwoofer Note Using RGB or DVI Video Input Connecting a PCOperating the DISPLAY-BASICS Powering on / OFFSelecting Signal Source Using Mute Adjusting Sound VolumeUnderstanding Hdtv What is Digital Television or DTV?What is the Difference Between HDTV, EDTV, and SDTV? Running HdtvWhat is Down-Convert? Picture-In-Picture PIP / Split Screen Advanced FunctionsPIP Window Swap Accessing PIP and POP Modes using OSDPicture-In-Picture PIP / Split Screen Con’t PIP On/Off Input Source Selection PIP Window PositionUnderstanding Widescreen Modes For 43 Aspect Ratio Square ContentFor Widescreen Content Widescreen 169 Aspect Ratio Viewing ModesWidescreen Viewing Modes Con’t On-Screen Display OSD SettingsAccessing Widescreen Viewing Modes using OSD Accessing OSD Settings MenuSleep Timer On/Off Sleep Timer SettingsSetting Sleep Timer Using OSD Setting Sleep Timer Using Remote ControlSwitching OFF Built-In Speakers Sound AdjustmentsSetting Output Using OSD Sound Adjustments Using OSDWhen Using RGB & DVI Inputs Signal Frequency Information DisplayWhen Using AV1 and AV2 Inputs When Using Component 1 & 2 InputsFor AV / S-Video Adjusting PictureAccessing Picture Adjustment Mode For Component Video Geometric AdjustFor Component Video Con’t Accessing Geometric Adjust ModeFor RGB / DVI Specifications RGB/DVI For Vesa Standard Pin Assignments For D-SUB Connector In / Loop OutPin Assignments For 24 Pin DVI ConnectorDigital Only Weight Maximum ResolutionDimensions Without Stand With Stand Package DimensionsEmission Requirement Power Management Mode Sync VideoRear View Wall Mount OptionTV / Cable TV Connections Connecting to TV or Cable TVImportant Safety Instructions Outdoor Antenna Grounding AppendixRemote Control Changing Channels Using Remote ControlUsing Front Panel & OSD Menu Quick View TV Tuner SettingsAccessing the TV Settings Menu Using Quick View on Remote ControlFavorite Channel / Channel Lock Favorite Channel and Channel Lock SettingsParental Guide Table Accessing V-ChipParental Guide Changing the Passcode Passcode SettingOverview For TV Adjusting PictureTroubleshoot Common Conditions Symptom Possible Cause Remedy= FAX Customer SupportLimitation of implied warranties Limited WarrantyHow to get service Viewsonic Plasma DisplayUSA Risk of Electric Shock Important Safety InstructionsAvoid Still Images Cleaning and MaintenanceFront Panel Cleaning Instructions Cabinet Cleaning InstructionsCompliance Information for Canada
Top Page Image Contents