PYLE Audio PLDVD48 owner manual Trouble Shooting

Page 31

TROUBLE SHOOTING

If it appears that your DVD unit is faulty, first consult this checklist. It may be that something simple has been overlooked.

Under no circumstances should you try to repair the player yourself, as this will invalidate the warranty. Only qualified service personnel can remove the cover or service this player.

NO POWER

If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”.

Check if the fuse is blown. Then replace the new fuse.

Check if the on/off button on the front of the player is set to on.

NO PICTURE

Check if the monitor or TV is switched on.

Check if select proper mode, such as Disc Play mode and AV mode.

Check the video connection.

DISTORTED PICTURE

Check the disc for fingerprints and clean with soft cloth, wiping from centre to edge.

Sometimes a small amount of picture distortion may appear. This is not a malfunction.

COMPLETELY DISTORTED PICTURE

The disc format is not according to the TV-set used (PAL/NTSC).

NO COLOR IN PICTURE

The disc format is not according to the TV-set used (PAL/NTSC).

DISC DOES NOT PLAY

Ensure the disc label is upwards.

Clean the disc.

Check if the disc is defective by trying another disc.

NO SOUND

Check audio connections.

If using a HIFI amplifier, try another sound source.

DISTORTED SOUND FROM HIFI AMPLIFIER

Check to make sure that no audio connections are made to the amplifier phono input.

THE PLAYER DOES NOT RESPOND TO THE REMOTE CONTROL

Aim the remote control directly at the sensor on the front of the player.

Avoid all obstacles which may interfere with the signal path.

Inspect or replace the remote control battery.

DISTORTED OR B/W PICTURE

The disc format is not according to the TV-set used (PAL/NTSC).

NO AUDIO AT DIGITAL OUTPUT

Check the digital connections

Check the Digital Audio menu to make sure that the digital output is correctly set.

Check if the audio format of the selected audio language matches your receiver’s capabilities.

BUTTONS DO NOT WORK

Press Reset button on the housing of the DVD unit.

THE RADIO DOES NOT WORK

Check if the antenna cable is connected firmly.

THE RADIO STATION AUTOMATIC SELECTION DOES NOT WORK

If the signals are too weak, select a station manually.

31

Image 31
Contents PLDVD48 USE this Product Safely FeaturesContents Region Management Information Region Management Information Safety InformationDVD Disc NotesMP3 DIN FRONT/REAR-MOUNT InstallationInstallation Opening Installing the unitRemoving the unit DIN REAR-MOUNT Method B To Reinstall the Front Panel Using the Detachable Front PanelMute While Telephoning Wiring ConnectionLocation and Function of Keys When remove the front panelPlayer Remote Control Mute SetupAngle ZoomLOADING/EJECTING a Disc Remote ControlBasic Operation OperationAutomatic Memory Storing & Program Scanning Radio Operation Switching to Radio ModeSelecting Station LOCAL/DISTANTDisc DVD/VCD/CD/MP3 Operation Previewing Playing only for VCD/CD/MP3 Time Search GotoFor CD/VCD with PBC OFF Playing in Random Order only for VCD/CD/MP3For CD ON-SCREEN Display FunctionTitle Menu Function for DVD only MULTI-AUDIO Language FunctionMULTI-SUBTITLE Language Function for DVD only MULTI-ANGLE Function for DVD onlySmart Navigation in MP3 Disc Play Smart Mode FunctionFolder Selecting Tracks Switching to CDC ModeCDC Operation DVD Changer OperationAV in Operation Initial Setup General Setup SetupCaptions setup PIC mode setupAngle Mark display setup OSD Lang type setupOP Mode Speaker SetupAudio Setup SCR Saver setupLpcm Output Preferences SetupTV type setup Audio language setupPassword Subtitle language setupParental Logo DefaultsSmart NAV Spdif OFF Defaults TableFull Trouble Shooting Radio SpecificationsGeneral DVD PlayerDiscs played Supply voltagePage Page 88-V1623-02