Cambridge Audio azur DacMagic user manual Digital audio output connections

Page 16

Digital audio output connections

Note: Do not turn on the unit until all connections have been made.

DacMagic

Balanced Output

RL

L

R

Unbalanced

Output

Digital Outputs

Digital Inputs

Digital Inputs

USB In

AC adaptor

OR

Digital recorder

Digital Inputs

If it is desired to loop out the currently selected digital audio for recording on a suitable device (MD, CD-R, etc.), you can connect either an S/P DIF co-axial or TOSLINK optical cable to the digital outputs as shown, each type being of equal quality. Both output types are active concurrently and both can be used simultaneously to run equipment.

Note: There is no upsampling performed on the digital output pass-through.

16

Image 16
Contents Azur DacMagic Contents Introduction Important safety instructions CE mark FCC regulations Power sources Rear panel connections Unbalanced Audio OutputsBalanced Audio Outputs Digital OutputsAC 12V 1.5A Power Adaptor Socket Important Note Use the supplied power supply unit onlyDigital Inputs 1 USBPower On/Off Filter/Phase SelectFront panel controls SourcePhase Incoming Sample RateAudio output connections Digital audio input connections AC adaptor Azur DacMagic Digital audio output connections Operating instructions Linear Phase Filter FiltersImpulse response Amplitude Minimum Phase Filter Azur DacMagic Steep Filter Azur DacMagic Page Technical specifications Troubleshooting There is no powerThere is no sound Low hum or buzzing sound can be heardLimited warranty AP23905/1-A