Troubleshooting
There is no power
Ensure the supplied AC adaptor is connected securely to the PSU socket on the rear panel.
Ensure that the correct mains transformer is being used and that it complies with the local electrical supply.
Ensure the mains plug is fully inserted into the wall socket and is switched on.
There is no sound
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
Check that the correct digital input is selected (Incoming Sample Rate LED should be on).
A low hum or buzzing sound can be heard
Power cords or lighting placed near this product.
Analogue inputs are not securely connected.
Visit
This guide is designed to make installing and using this product as easy as possible. Information in this document has been carefully checked for accuracy at the time of printing; however, Cambridge Audio's policy is one of continuous improvement, therefore design and specifications are subject to change without prior notice. If you notice any errors please feel free to email us at: support@cambridgeaudio.com
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. All trademarks and registered trademarks are the property of their respective owners.
© Copyright Cambridge Audio Ltd 2008
26