Cambridge Audio azur DacMagic user manual Phase, Incoming Sample Rate

Page 11

azur DacMagic

4Phase

Indicates the output phase selected. Press and hold the Filter/Phase select button for approximately two seconds to select normal or inverted phase output. When the LED lights up, the phase is inverted by the DacMagic.

If you suspect that your source material or amplifier, etc., is inverting the phase of the musical signal, you can use this function to re-invert the audio and regain absolute positive phase.

5Incoming Sample Rate

In the presence of an incoming digital stream, the relevant LED will light up to indicate the incoming digital sampling frequency (between 32kHz and 96kHz LPCM).

ENGLISH

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Azur DacMagic Contents Introduction Important safety instructions CE mark FCC regulations Power sources Digital Outputs Rear panel connectionsUnbalanced Audio Outputs Balanced Audio OutputsUSB AC 12V 1.5A Power Adaptor SocketImportant Note Use the supplied power supply unit only Digital Inputs 1Source Power On/OffFilter/Phase Select Front panel controlsIncoming Sample Rate PhaseAudio output connections Digital audio input connections AC adaptor Azur DacMagic Digital audio output connections Operating instructions Filters Linear Phase FilterImpulse response Amplitude Minimum Phase Filter Azur DacMagic Steep Filter Azur DacMagic Page Technical specifications Low hum or buzzing sound can be heard TroubleshootingThere is no power There is no soundLimited warranty AP23905/1-A
Top Page Image Contents