Daewoo SD-2100P AutoClock, Else exit the basic installation function and enjoy your player

DV6T711P-AP(DESUK)1 02.7.24 11:16 AM ˘ ` 24 mac001 300DPI 120LPI

5 Should you wish the stations to have the same numbers as those used on the TV, follow the instructions in "Sorting programme locations" on page 35.

Else ...

exit the basic installation function and enjoy your player.

CHECK UP!

MANUAL SET

PR01 BBC1	PR08 SKYS
PR02 BBC2	PR09 MTVE
PR03 ITV	PR10 P-10
PR04 CHA4	PR11 P-11
PR05 SKY1	PR12 ----
PR06 SKYN	PR13 ----
PR07 SKYM	PR14 ----

PR+/-:SELECT

OK:CONFIRM SETUP:END

•If you don´t see this picture, because you don´t use a SCART cable, search this picture now (CH 52) with the station tuning functions of your TV set (see its user manual).

•	In case of interference problems on CH 52, type in an
	other transmission channel between 21 and 69 using
	the number buttons.

AutoClock

■Auto Clock is only available for models with the PDC function (see page 36).

Some broadcasting stations may send the time and date along with the PDC data. The video will automatically use this time and date during the initial setting up procedure during normal use, and every time you switch the video off at the mains. If you find that this time and date is incorrect you can remove this feature by following the steps below changing it to OFF mode, you will then have to manually set the time and date, see page 25.

1	Call the player’s "MAIN SETUP",
	choose "VCR SETUP".
	And press the [OK] button.
	Select “AUTO CLOCK ON/OFF”.

2 If you want AUTO CLOCK OFF mode, select it and press [OK] button to confirm.

VCR SETUP

CLOCK SET

RF OUTPUT SET 16:9 SET

OSD ON/OFF AUTO CLOCK

PR+/-:SELECT

OK:CONFIRM SETUP:END

AUTO CLOCK

ON

OFF

PR+/-:SELECT

OK:CONFIRM SETUP:END

24