Daewoo SD-8100P, SD-2100P More Functions, Clock/counterdisplay, Remainingtimeandcassettelength

DV6T711P-AP(DESUK)1 02.7.24 11:17 AM ˘ ` 39 mac001 300DPI 120LPI

More Functions

■The counter counts in real time from the point you load the cassette. This does not have to be its beginning! The counter does not count unrecorded parts of the tape.

■If you rewind beyond the zero position, the counter counts in negative values (e.g. – 0:01:15).

Clock/counterdisplay

Each time you press [DISPLAY] button,

1x: Time and date+current status Time and date

2x: Counter+current status counter

3x: disappear.

But if you press [CLK/CNT] button, clock and counter on display window will change each other.

CHECK UP!

STOP SP	PR01 ARD
	STEREO ON

14:00 14/10 V E180 00:48

•If didn’t wind tape (PLAY, FF, REW,...), it doesn’t appear the tape remain time.

•In case that the timer recording information is inputted in the received broadcasting signal , press the button to display the PDC icon.

Remainingtimeandcassettelength

Call the player’s “MAIN SETUP”, choose “TAPE CONTROL”.

TAPE CONTROL	TAPE REMAIN
TAPE REMAIN	E-180
GO TO ZERO	E-240
COUNTER RESET	E-300
INDEX+
INDEX-	PR+/-:SELECT
PR+/-:SELECT		E-240 01:27
OK:CONFIRM SETUP:END	OK:CONFIRM SETUP:END

When you want the player to show the time remaining from the current player tape position (to find out if there is sufficient space for a recording, for example).

To ensure the remaining time shown is accurate, select the length of cassette currently loaded by selecting this function until you reach the correct length.

CHECK UP!

• Remaining time display is only possible when the cassette is loaded.

Accessingcounterzeroposition

The player will wind to the position 0:00:00 and stop.	REW SP
	GO TO ZERO
	0:02:13

VCR Operation

39