Daewoo DSC-34W70N user manual Troubleshooting

Page 59

TROUBLESHOOTING

TOMS

SYMP

Neither picture nor sound:

 

 

 

•Is power code plugged in?

INSPECT

 

 

Picture is OK, but no sound:

•Check if “Volume Down” is pressed.

•Check if the “Volume Control” is set to the minimum position.

Sound is OK, but no color:

•Check if the “Color Control” is set to the minimum position. •Check if the program on air is in color, or in black and white. •Check if the antenna installation and its connection are OK.

BBefore Asking for Service:

Overlapped Picture

Image:

•Check if the antenna direction is correct.

•Check if the “Fine Tuning” function is set up correctly.

ACTION

•Press power button on the front of TV.

•If the red power light is on, press the remote control power button. Red power light should be green.

•Adjust the volume with “Volume Up” button.

•Check the antenna again. •Check by turning on other channel programs.

•Refer to the color section again, and readjust the color.

•Direct the antenna toward the broadcasting station.

•Adjust the “Fine Tuning” function.

T r o u b l e s h o o t i n g :

SYMP TOMS

Picture has “Snow”:

 

 

•Check if the antenna is

INSPECT

damaged or its connection is all

right.

 

 

•Check if there is an interference

 

from car traffic or neon signs.

HANDLING

•Correct the antenna faults or

replace the connection cable.

 

Stripes on picture:

•Check if there is an interference by other electronic devices, such as radio, telephone, etc.

•Keep magnetic or electronic devices away from the set.

Bad stereo sound:

•Long distance from the station or other radio waves could cause bad sound reception.

•Shift the mode into “Mono” by using “MTS” button.

Operation disorder of Remote Control:

•Check if the batteries are low. •Check “Remote Control Sensor” window.

•Get rid of objects blocking the TV sensor and Remote Control

•Replace batteries or check if the electrodes are fitted properly in the compartment.

59

Image 59
Contents Hdtv Monitor DSC-34W70N Risk of Electric Shock Do not Open Important Safeguards Example of Antenna Grounding Contents Case of using two separate antenna cables Connecting AntennaCase of using single antenna cable Front and Side of TV set Name of Each PartSide panel inputs Installation of batteries Remote Control ButtonsRemote Control To use the buttons under the cover Under the Cover of Remote ControlTo Watch TV Program To Watch TV ProgramPress the Channel buttons Press the TV POWERbuttonAdjust the Volume Press the TV Power button to turn off the TV programPress Menu button Select SetupSelect Auto Program by using CHANNELx/y buttons Automatic Memory of ChannelOnly memorized channels are selected Check the memorized status by pressing CHANNELx/y buttonsChoose to add or erase from memory Green. When erased, it turns redAdd or Remove Channel from Memory Select a channelFollowing example Press TV/CATV buttonPress Wide button Select a channel by pressing either number Buttons 0 9 orSequence TV Video1 Video2 Video3 DVD TV Screen changes to video mode as followsWatching Video Programs Use CHANNELx/y buttons to control the left window Press PIP button oncePress PIP button once more Then the screen appears as follows Various Functions of Simultaneous Window ModeSelect Funtion button Select PIPPress Menu button twice Menu mode will disappearPress PIP button Select Video mode with the auxiliary windowSelecting Simultaneous Windows Press PIP button again, and the auxiliary window disappears PIP mode changes to twin windowsPress PIP button again Press Search button Press Position button Changing Location of Auxiliary WindowsPress Swap button Window Mode SwapThis function also operates in Twin Windows mode This function works in Multi-Windows mode tooMaking Pause Auxiliary Windows Screen appears as follows Adjustable Headphone Volume LevelsPress CHANNELx/y buttons Select Sound menu by using VOLUMEC/B buttonsOpen Function Menu For pressing Auto Picture button many times Adjusting Picture QualityUse this mode and get quality pictures on the screen Press Auto Picture buttonPicture Noise Reduction Select Picture by using CHANNELx buttonAdjusting the Picture Screen to Your Preference Adjust Brightness by using VOLUMEC/B buttons Adjust Tint by using VOLUMEC/B buttonsBalance Adjusting the SoundSelect Equalizer by using CHANNELx/y buttons Customizing the AudioCHANNELx strengthens the selected range of sound Select Range of Sound by using VOLUMEC/B buttonsMono Stereo SAP Receiving Stereo or SAP Mode ProgramsPress MTS button Select Function by using VOLUMEC/B buttons Setting up Present TimeSet up the Curent Time Then, the screen will appear as follows Then Function mode is selected, and its sub- menu appearsSelect Off Time to turn TV set On Set up On TimerPress VOLUMEC/B buttons until Off turns to On Select On Time to turn the TV set OnControl of Sleep function with the Remote Control Setting up Sleep TimeSet up the Off Timer Finish Setting up Time MemoryExample Special FunctionsSelecting the On-Screen Language Select FunctionCronómetro Select the language using VOLUMEC/B buttonsHighlight Ch Editas shown Fine Tuning ChannelsSelect Set Up Highlight Fine Select Fine to fine tuneSub menu will appear Setting up Caption FunctionSelect an appropriate mode Select Child Lock Setting up Child Lock FunctionTV-Y Enter your passwordMove Adj. Exit Choose from the list Pro Logic SettingsSelect Special Select Pro LogicSelect Tilt Adjust Tilt functions using VOLUMEC/B buttonsPress VOLUMEC/B buttons to level a tilted picture Tilt PictureSelect DTV DTV Input SelectionRear Panel Connections Connecting EquipmentsHD Component Output To connect a HD component, follow the diagram belowHD component Speakers CamcorderProgramming the Remote Control Cable TV Box Brand Code Component Codes013 014 016 VCR Brand Code164 Troubleshooting Inputs/Outputs SpecificationsFeatures GeneralN48586120E105-R1