Preparation
Aerial Connection with VCR
Connect your ① aerial cable to the RF(aerial) IN terminal on the VCR.
Connect the RF OUT terminal of the VCR to the Aerial terminal on the TV set with ② RF cable.
NOTE: If you wish to use only the Aerial (RF) connection to match the VCR, then you should store the VCR channel on the TV to programme number “ZERO” using the “Manual tuning” function (See page 20). Now you can watch the VCR in TV mode by selecting the pro- gramme number “PR00”.
VCR
RF IN
RF OUT
① | ② |
11