Preparation
Connecting Component or VIDEO or S-VIDEO from a DVD
1.Prepare the AV cable.
2.Connect the DVD(Output) to the LCD(Component or Video Input) as shown below.
3.When connecting to an external AV source, be sure to match the colors.
4.Turn the LCD and the DVD ON.
5.Select [Component 1 or Component 2, Video1, Video2, Video3] by pressing the
“MULTIMEDIA” or 
button of the Remote Control or the„INPUT SELECT” Key in KeyPad of the LCD set.
6.Each time you press the “MULTIMEDIA” or “TV/VIDEO” button, a different input mode appears. The sequence is as follows:
MULTIMEDIA Button : Component1 > Component2 > PC RGB > DVI > Component1
: TV > Video1 > Video2 >
7.Select a desired title and function by using the Remote Control of the DVD.
LCD TV
1
2
R L Pb Pr Y
COMPONENT INPUT
DVD
14