Daewoo DLP-3212, DLP-2612 Menu Operation, Picture Control, Smart Picture mode Selection

Menu Operation

Picture Control

1.Press the MENU button to call up the menu.

2.Move the selection bar to the Picture menu with the ▼PR▲ buttons.

3.Press the VOL► button.

4.Select the item to adjust with the ▼PR▲ buttons.

5.Press the ◄VOL► buttons.

The level adjust mode of each function appears : “Brightness”,“Contrast”,“Colour”,“Sharpness”,“Tint”. You can adjust the level of each item by using the ◄VOL► buttons.

NOTE:

Tint is displayed only when receiving a NTSC signal. The adjusted levels are stored automatically in Favourite mode.

NOTE:

You cannot adjust the colour saturation in PC and DVI mode.

This is PRE-SET to the correct level by the system.

Smart Picture mode Selection

1.Select Mode from the Picture menu.

2.Using◄VOL► buttons, Select the desired mode.

Four pictures settings;

Standard > Dynamic > Cinema > Favourite

Note :

When you press the Picture button on the remote controller repeatedly, you can call up four pictures settings.

Standard: For a highly defined image in a normally bright room

Dynamic: For a clear-cut image emphasizing high contrast for sports viewing

Cinema: Ideal for movies

Favourite: Allows the user to customize settings as desired.

	Picture	Mode	Standard
	Sound	Brightness	48
	Screen	Contrast	63
		Colour	50
CH	Install	Sharpness	50
	Features	Tint	0
	Move	Select	Menu:Save

23