Runco VX-55D, VX-44D Information, ISF Presets ISF Night ISF Day Custom Save Factory Default

Page 83

Operation

Overscan: Image Overscan pushes the outside edge of the active picture area of the video signal out beyond the edge of the display area.

Some television programs are produced based on the assumption that older television sets may not display the outer edges of the broadcast picture area. Over scan effectively trims away these inactive, outer edges and enlarges the remaining portion of the image to fill the display area.

Select from 1% to 10% of Overscan, as desired.

For HDTV, DVDs and other video sources, Overscan is generally not necessary or desirable.

For each input, the VX-44d/-55d lets you save image quality settings as presets that you can recall at a later time. You can create up to four presets per input and resolution. Use the ISF Presets menu to recall saved image presets, or to save image settings in the “Custom 1” or “Custom 2” memory location. The currently-selected preset is indicated by a “7” to its left; in the example shown here, ISF Night is selected.

You should save changes to any of the following settings to a preset; otherwise they will be lost when a new input source or resolution is selected:

•Brightness

•Contrast

•Color saturation

•Tint

•Sharpness

To reset the Custom 1 and Custom 2 image presets to their factory defaults, select Factory Default and press ENTER.

Select Information from the Main Menu to see information that uniquely identifies your DHD Controller: its serial number, the installed hardware and firmware versions and the firmware version build date. Should you ever need to contact Runco Technical Support, this information will help them answer your questions or resolve product performance issues.

ISF Presets

ISF Presets

7ISF Night

…ISF Day

…

Custom 1

Save

…

Custom 2

Save

Factory Default

Information

Information

Serial Number

Hardware 0

Firmware 0100.023A

Date

Jan 11 2007

Runco VX-44d/-55d Owner’s Operating Manual

71

Page 82 Page 84
Image 83
Page 82 Page 84
Contents VX-44d VX-55d Page For Projectors, Video Processors and Controllers TWO Year Limited WarrantyEffective Warranty Date Runco INTERNATIONAL, INC Safety Precautions Table of Contents Install Projector Stand CineWide with AutoScope, Floor-Mount Serial Communications Maintenance and TroubleshootingSpecifications OperationTable of Contents List of Figures Xii About This Manual Degrade performance or cause a malfunction Using This ManualCertain features Significance. They also provide supplemental informationFormat screen Description, Features and BenefitsOptional Accessories VX-44d/-55d Top/Rear/Front View VX-44d/-55d at a GlanceVX-44d/-55d Input Panel Input 1 Rgbhv RemoteEthernet VX-44d/-55d Rear-Panel Keypad Right Button UP ButtonLeft Button Down ButtonVacuum Fluorescent Display DHD Controller Front PanelRunco Icon IR SensorMenu Button Composite Video Input DHD Controller Rear PanelOutputs 1. Hdmi OUT Main AC Fuse Main Power SwitchRS-232 Output RS-232 Control PortDHD Controller/VX-44d/-55d Remote Control VX-44d/-55d Remote Control UnitLight IR Output IndicatorEnter Cust CinemaISF Night ISF DAYRemote Control InstallationStep Procedure For Details, Refer to Quick SetupInstallation Overview Installation specialistAmbient Light Installation ConsiderationsProjector Installation Options Installation TypeVX-44d/-55d Lens Options and Throw Ratios Position Ceiling InstallationFloor Installation Vertical and HorizontalHorizontal Lens Shift Example only Vertical and Horizontal Lens Shift Limits Folded Optics Lens Assembly Front View Installing the Projection LensFixed CineWide Are both fully assembled Installing the Optional CineWide Lens MountAutoScope or Base Plate AutoScope stand used for floor-mounted projector VX-44d/-55d MountingConnections to VX-44d/-55d and DHD Controller Connecting the VX-44d/-55d to the DHD ControllerHdmi Connections See Figure Connecting SourceComponents to the DHD Controller10. Digital DTV RGB or Component Video Connections Digital DTV RGB or Component Video Connections See FigurePersonal Computer Analog Computer RGB Connections See FigureDVD Player, VCR Satellite Receiver Laser Disc etc Composite/S-Video/Component Video Connections See FigureTrigger Outputs to Connecting 12-VoltRS-232 Controller ConnectionConnecting an External IR Receiver to the DHD Controller 14. Connecting 12-Volt Trigger OutputsInput voltage to the AutoScope lens motor must be between Built-in IR sensor on the DHD Controller is disabledComponent SD Ntsc 480i 169Vx44/55 Turning on the PowerFocus Zoom Vertical and Horizontal Lens Shift Adjusting the Picture Orientation Primary Lens AdjustmentsIt is extremely important that the primary lens is properly Installing and Adjusting the CineWide Anamorphic LensTrigger CineWide with Configure Lens MotorAdjust the Anamorphic Horizontal Position X AdjustmentInstallation Geometry Anamorphic Lens Top ViewWrong Position Calibrating Projector Input 2 DVI Main 16. TheaterMaster Remote Control for VX-44d/-55dControl Functions TheaterMaster RemoteNavigating the Projector Menus Are disabledChannel Setup Lbx nt PDigIDig 4x3 ntChannel Edit Name Auto SetupTechnical Support Size and Position MenuAnamorphic lens in the light path, the aspect ratio is Installation Recommended see below Adjust Pixel Tracking before Pixel PhaseValues shown represent where the approximate center Picture Quality MenuBack Porch Uncheck this item before exiting this menu There must be at least two consecutive white pixels present256 256 Auto Color EnableClipping Detector Color Enable Red White Balance Pre CalibrationLumaCal lamp calibration takes approximately two minutes Installation MenuReadjust when absolutely necessary To using LumaCalPower cycles Originally expected may no longer be possible Working With the LampIntensity value is not the actual lumen output, but rather a More easily maintained as the lamp ages Operation Using the On-Screen MenusAspect Ratio ISF PresetsService Input SourceAspect Ratio Main MenuInput Source Remote Aspect Ratio Control Description Key Aspect Ratio SettingsCinema Picture Brightness Contrast Color Tint Sharpness PictureTypical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Input Position Left/Right Up/Down Width Height Overscan ResolutionInput Position Information Serial Number Hardware Firmware 0100.023A Date ISF PresetsISF Presets ISF Night ISF Day Custom Save Factory Default InformationShould be used by ISF-certified technicians only You must enter a passcode to access the Calibration menuCalibration Operation Input Names Restore Composite Video Component SD ServiceYou must enter a passcode to access the Service menu Vertical Keystone Correction Do not change the Type setting in this menuAuto ADC Bandwidth Auto YPbPr Input ResolutionHD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUV Operation Operation Removing the Lamp Door Lamp and Filter ReplacementRemoving the Lamp RVR Lamp Message Lamp Limit Lamp Mode Power Intensity147 Lamp S/NRemoving the Primary Lens Lens ReplacementSymptom Possible Causes Solution Troubleshooting TipsTroubleshooting Chart Configure Lens Motor Code Description General VX-44d/-55d Error CodesError Codes Code Description Lamp Failures Power and CoolingPanel Driver and Formatter Code Description Tipm Image ProcessorBuilt-In Keypad Code Description Miscellaneous Serial Commands RS-232 Connection and Port ConfigurationSerial Command Syntax Aspect Ratio Commands Image Preset Commands Output Shift Commands Bkgnd Enter key Command Parameter Value Min/maxVX-44d/-55d Specifications VX-44d/-55d SpecificationsDimensions Home Theater Calibration SpecificationsIndustry-Standard Specifications Power Requirements VX-44dSpecifications are subject to change without notice Limited WarrantyDHD Controller Specifications DHD Controller SpecificationsVX-44d/-55d Dimensions VX-44d/-55d Dimensions100 Runco VX-44d/-55d Owner’s Operating Manual Page Runco CL-810 Owner’s Operating Manual RUMA-011195 Rev 02-01-07
Related manuals
Manual 120 pages 41.71 Kb

VX-55D, VX-44D specifications

The Runco VX-55D and VX-44D projectors represent a pinnacle in home theater technology, offering expansive image quality and immersive viewing experiences. Runco, known for its commitment to delivering exceptional visual performance, has integrated numerous features and advanced technologies in these models.

One of the standout features of both the VX-55D and VX-44D is their native 1080p resolution, delivering stunningly sharp images with vibrant colors that capture the finest details. This high definition capability ensures that viewers can enjoy their favorite movies, sports, and gaming content with unparalleled clarity. The projectors utilize the latest DLP (Digital Light Processing) technology, which enhances brightness and color accuracy, providing a more vivid and lifelike picture.

Another impressive characteristic of the Runco VX series is its exceptional contrast ratios. With deep blacks and brilliant whites, these projectors offer a dynamic range that brings out subtle details in both shadow and highlight areas. This contrast performance is particularly beneficial for watching films in darker environments, where the depth of imagery is crucial for immersion.

In terms of color processing, the VX-55D and VX-44D incorporate Runco's proprietary ColorPalette technology. This system ensures accurate and rich color reproduction by utilizing a wide color gamut, allowing viewers to experience content as the creators intended. Coupled with advanced color management capabilities, users can further tweak their viewing experience to match their preferences.

The integration of flexible installation options is another highlight of these projectors. They support up to 10-point digital keystone correction, making setup simple and adaptable to various room configurations. This flexibility ensures that no matter the space, users can achieve a perfectly aligned and geometrically accurate image.

Runco has also designed the VX-55D and VX-44D with user-friendly interfaces, including intuitive remote controls and on-screen menus. Both projectors come equipped with multiple HDMI inputs, allowing users to connect various devices seamlessly. Additionally, they support 3D content playback, a feature that has become increasingly important for enhancing the cinematic experience.

Energy efficiency is a consideration in the design of these projectors as well, making them not only high-performance devices but also more sustainable than many of their counterparts. With a sleek aesthetic, the Runco VX-55D and VX-44D can seamlessly blend into any home theater setup, adding a touch of elegance while providing an extraordinary viewing experience.

In summary, the Runco VX-55D and VX-44D projectors are characterized by their high-definition resolution, advanced DLP technology, rich color processing, and flexible installation options, making them ideal choices for any home theater enthusiast looking to elevate their viewing experience.
Top Page Image Contents