Runco PL-50XA, PL-61DHD manual Operation, Turning on the Power

Page 39

4. Operation

1.Turn on your source components.

2.Attach the two ferrite cores supplied with the display to each end of the AC power cable as shown in Figure 4-1.Doing so will reduce radio frequency interference (RFI) emissions to a level that conforms to FCC regulations. Use the supplied plastic bands to secure the cores in place.

Power cable

Ferrite Core

Ferrite Core

Figure 4-1. Attaching the Ferrite Cores to the Power Cable

3.Plug the female end of the power cord into the AC receptacle on the rear of the PlasmaWall (AC 100V ~ 240V). Connect the other end to your AC power source.

4.Similarly connect the DHD Controller to a nearby AC outlet.

5.Press the POWER button on the underside of the PlasmaWall. Its power indicator lights green.

6.Turn on the main power switch at the rear of the DHD Controller.

7.Press the ON button on the remote control to turn on the DHD Controller (or press the power

button on the front of the DHD Controller). The power indicator on the DHD Controller lights solid blue.

8. After a brief warm-up period (approximately 10 seconds), the PlasmaWall will display an image.

4.1

Turning on the Power

Runco PlasmaWall Owner’s Operating Manual

29

Image 39
Contents PL-50XA PL-61DHD Page For Plasma Displays Three Year Limited WarrantyRIGHTS, Limits and Exclusions Runco INTERNATIONAL, INC DOC Compliance Notice Safety PrecautionsTable of Contents Serial Communications Maintenance and TroubleshootingSpecifications OperationList of Figures List of Figures About This Manual IntroductionIf you need Turn to Using This ManualKey Features and Benefits Description, Features and BenefitsOptional Accessories Controls and Indicators Controls and FunctionsPlasmaWall at a Glance Connectors Input SELECT/EXITMENU/ENTER DVD/HD3, DVD/HD4 Hdmi External Speaker OutputsAUDIO1, AUDIO2, AUDIO3 DVD/HD2Vacuum Fluorescent Display DHD Controller Front PanelRunco Icon IR SensorDown Button UP ButtonLeft Button Enter ButtonDVI OUT HD1 / HD2 Analog BNC connectorsComponent Video RCA connectors DHD Controller Rear PanelMain AC Fuse Main Power SwitchComposite Video Input RS-232 Control PortDHD Controller Remote Control DHD Controller Remote ControlMenu IR Output IndicatorEnter LightCust CinemaSVC ISF DAYRemote Control InstallationOther surfaces Step Procedure For Details, refer to Quick SetupOn a Wall or Table Stand InstallationConsiderations Mounting the PlasmaWallVentilation Other ConsiderationsProlong operating life Connecting PlasmaWall to the DHD Controller Connections to the PlasmaWall and DHD ControllerDHD Controller RS-232 Connection from the DHD Controller to the PlasmaWall Connecting Source DTV Source Analog Computer RGB Connections See Figure Refer to Computer/Video Signal Compatibility on page 55 forComposite, S-Video and Component Video Connections Composite/S-Video/Component Video Connections See Figure Connection RS-232 ControllerCable Management 11. Installing the Cable ClampsInstallation Operation Turning on the PowerChanging the OSD Language Setting the PC Display PropertiesUsing the On-Screen Menus Aspect Ratio ISF PresetsService Input SourceInput Source Composite Video 1 S-Video Component SD Main MenuInput Source Aspect RatioRemote Aspect Ratio Control Description Key Aspect Ratio SettingsPicture Brightness Contrast Color Tint Sharpness PictureTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Input Position Left/Right Up/Down Width Height Overscan Input PositionCalibration ISF PresetsISF Presets ISF Night ISF Day Custom Save Factory Default InformationOperation Service Operation Operation Operation Maintenance and Troubleshooting Troubleshooting TipsSymptom Possible Causes Solution Computer/Video Signal Serial Communications Command Parameter Value Description Min/max Stored?Serial Communications Tint OWIDTH? End user except for plasma glass panel SpecificationsPlasmaWall Specifications Specifications are subject to change without noticeDHD Controller Specifications PlasmaWall Model PL-50XA Dimensions PlasmaWall DimensionsPlasmaWall Model PL-61DHD Dimensions Computer/Video Signal Compatibility Chart Computer/Video Signal CompatibilitySUN Page RUMA-010950
Related manuals
Manual 68 pages 9.96 Kb Manual 72 pages 63.77 Kb