Runco PL-50XA, PL-61DHD manual ISF Presets, Information, Calibration

Page 49

Operation

Overscan: Image Overscan pushes the outside edge of the active picture area of the video signal out beyond the edge of the display area.

Some television programs are produced based on the assumption that older television sets may not display the outer edges of the broadcast picture area. Over scan effectively trims away these inactive, outer edges and enlarges the remaining portion of the image to fill the display area.

Select from 1% to 10% of Overscan, as desired.

For HDTV, DVDs and other video sources, Overscan is generally not necessary or desirable.

For each input, the PlasmaWall lets you save image quality settings as presets that you can recall at a later time. You can create up to four presets per input and resolution. Use the ISF Presets menu to recall saved image presets, or to save image settings in the “Custom 1” or “Custom 2” memory location. The currently-selected preset is indicated by a “7” to its left; in the example shown here, ISF Night is selected.

You should save changes to any of the following settings to a preset; otherwise they will be lost when a new input source or resolution is selected:

•Aspect ratio

•Picture quality settings (brightness, contrast, color saturation, tint and sharpness)

•Input position (image position, width, height and overscan percentage)

To reset all image presets to their factory defaults, select Factory Default and press

ENTER.

Select Information from the Main Menu to see information that uniquely identifies your display: its serial number, the installed hardware and firmware versions and the firmware version build date. Should you ever need to contact Runco Technical Support, this information will help them answer your questions or resolve product performance issues.

ISF Presets

ISF Presets

7ISF Night

…ISF Day

…

Custom 1

Save

…

Custom 2

Save

Factory Default

Information

Information

Serial Number

Hardware

Firmware

Date

Use the Calibration menu to perform advanced picture quality adjustments. This menu should be used by ISF-certified technicians only.

You must enter a passcode to access the Calibration menu.

Note

The changes you make here take effect immediately; you do not need to save them. To recall the ISF Night or ISF Day settings, select “ISF Night” or “ISF Day” from the ISF Presets menu (see above).

Calibration

Calibration

ISF Night

Display Color

Input Image

Input Color

ISF Day

Display Color

Input Image

Input Color

Runco PlasmaWall Owner’s Operating Manual

39

Page 48 Page 50
Image 49
Page 48 Page 50
Contents PL-50XA PL-61DHD Page For Plasma Displays Three Year Limited WarrantyRIGHTS, Limits and Exclusions Runco INTERNATIONAL, INC DOC Compliance Notice Safety PrecautionsTable of Contents Specifications Maintenance and TroubleshootingOperation Serial CommunicationsList of Figures List of Figures About This Manual IntroductionIf you need Turn to Using This ManualKey Features and Benefits Description, Features and BenefitsOptional Accessories Controls and Functions Controls and IndicatorsPlasmaWall at a Glance Input SELECT/EXIT ConnectorsMENU/ENTER AUDIO1, AUDIO2, AUDIO3 External Speaker OutputsDVD/HD2 DVD/HD3, DVD/HD4 HdmiRunco Icon DHD Controller Front PanelIR Sensor Vacuum Fluorescent DisplayLeft Button UP ButtonEnter Button Down ButtonComponent Video RCA connectors HD1 / HD2 Analog BNC connectorsDHD Controller Rear Panel DVI OUTComposite Video Input Main Power SwitchRS-232 Control Port Main AC FuseDHD Controller Remote Control DHD Controller Remote ControlEnter IR Output IndicatorLight MenuSVC CinemaISF DAY CustRemote Control InstallationOther surfaces Step Procedure For Details, refer to Quick SetupConsiderations InstallationMounting the PlasmaWall On a Wall or Table StandOther Considerations VentilationProlong operating life Connections to the PlasmaWall and DHD Controller Connecting PlasmaWall to the DHD ControllerDHD Controller RS-232 Connection from the DHD Controller to the PlasmaWall Connecting Source DTV Source Analog Computer RGB Connections See Figure Refer to Computer/Video Signal Compatibility on page 55 forComposite, S-Video and Component Video Connections Composite/S-Video/Component Video Connections See FigureConnection RS-232 ControllerCable Management 11. Installing the Cable ClampsInstallation Operation Turning on the PowerChanging the OSD Language Setting the PC Display PropertiesUsing the On-Screen Menus Service ISF PresetsInput Source Aspect RatioInput Source Main MenuAspect Ratio Input Source Composite Video 1 S-Video Component SDRemote Aspect Ratio Control Description Key Aspect Ratio SettingsPicture Brightness Contrast Color Tint Sharpness PictureTypical Gray Bar Pattern for Adjusting Contrast Gray Yellow Cyan Green Magenta Red Blue Input Position Left/Right Up/Down Width Height Overscan Input PositionISF Presets ISF Night ISF Day Custom Save Factory Default ISF PresetsInformation CalibrationOperation Service Operation Operation Operation Troubleshooting Tips Maintenance and TroubleshootingSymptom Possible Causes Solution Computer/Video Signal Serial Communications Command Parameter Value Description Min/max Stored?Serial Communications Tint OWIDTH? PlasmaWall Specifications SpecificationsSpecifications are subject to change without notice End user except for plasma glass panelDHD Controller Specifications PlasmaWall Model PL-50XA Dimensions PlasmaWall DimensionsPlasmaWall Model PL-61DHD Dimensions Computer/Video Signal Compatibility Chart Computer/Video Signal CompatibilitySUN Page RUMA-010950
Related manuals
Manual 68 pages 9.96 Kb Manual 72 pages 63.77 Kb

PL-50XA, PL-61DHD specifications

The Runco PL-61DHD is a premium plasma television that has captured the attention of home theater enthusiasts since its introduction. With a striking 61-inch display, this model combines advanced technology with elegant design to create a stunning viewing experience.

One of the standout features of the PL-61DHD is its impressive picture quality. The television boasts a full HD resolution of 1920 x 1080 pixels, which ensures that every image is sharp and vibrant. This high resolution, combined with Runco's proprietary video processing technology, delivers exceptional color accuracy and contrast, making it suitable for a range of content from movies to sports broadcasts.

The PL-61DHD employs Runco's unique Color Fidelity technology, which enhances the precision of colors on the screen. This technology ensures that viewers experience shades that are true to life, which significantly elevates the overall viewing experience. Moreover, the plasma panel excels in black levels and contrast ratios, providing deep blacks and bright highlights that make images pop.

Another impressive feature of the PL-61DHD is its ambient light rejection capability. This allows the television to perform remarkably well in various lighting conditions, making it versatile for different room environments. Whether in a dimly lit theater room or a bright living space, the PL-61DHD adapts to deliver optimal performance.

To facilitate seamless connectivity, the Runco PL-61DHD includes multiple input options, such as HDMI and component video. This range of connections allows users to hook up various devices, including Blu-ray players, gaming consoles, and streaming devices, maximizing the television's usability and making it a central hub for home entertainment.

The build quality of the PL-61DHD reflects Runco's commitment to excellence. The sleek and stylish design not only enhances the aesthetics of any room but is also engineered for durability. The unit’s robust construction ensures longevity, making it a solid investment for avid home theater enthusiasts.

In conclusion, the Runco PL-61DHD stands out in the world of high-end televisions due to its unparalleled picture quality, advanced technology features, and stylish design. It is a definitive choice for anyone looking to elevate their home viewing experience, making it a timeless addition to any home theater setup.
Top Page Image Contents