Installation
3.4
Connections to the Crystal Series LCD
Proceed as follows to connect the Crystal Series LCD to your video sources, external controller(s) – if present – and AC power.
When connecting your equipment:
•Turn off all equipment before making any connections.
•Use the correct signal cables for each source.
| • Ensure that the cables are securely connected. Tighten the thumbscrews on |
| connectors that have them. |
| • Use the left audio input when connecting mono audio sources. |
Connecting the Crystal ➤ | Connect your video sources to the Crystal Series LCD as shown and described in the |
Series LCD to Source | sections that follow. |
Components | Antenna/Cable TV Connection |
| |
| television source to the AIR or CABLE jacks on the rear of the Crystal Series LCD; see |
| Figure |
Input Panel
Cable Television
Network
Figure 3-1. Antenna/Cable TV Connection (CX-52HD only)
16 | Runco |