Runco CX-52HD, CX-57HD manual Sab

Serial Communications

Table 6-1. Serial Commands (continued)

Command				Description
[	+4A		Select “next” Main AV input
[	S4E	000#	Aspect ratio selection
			0	= 4:3 (Standard)
			1	= VirtualWide
			2	= Letterbox
			3	= 16:9 (Anamorphic)
Example:	[S4E0002 selects Letterbox
[	S4G	000#	PIP Input selection
			0	= TV
			1	= Input1
			2	= Input2
			3	= Input3
			4	= Input4
			6	= RGB
			8	= HDMI1
			9	= HDMI2
Example: [S4G0003 selects PIP Input3
[	+4G		Select “next” PIP AV input
[	SAB	000#	Power on/off control
			0	= standby, 1 = on
Example: [SAB0001 turns unit on
[	SCA	000#	Caption on/off
			0	= off
			1	= on
Example: [SCA0000 turns caption off
[	SCB	00##	Set major channel (AIR); ## = 01 - 99
Example: [SCB0002 selects off-air channel 2
[	SCB	1###	Set major channel (CABLE); ### = 001 - 125
Example: [SCB1102 selects cable channel 102
[	SCD	####	Set minor channel; #### = 0000 - 9999
			(Note: You must send a “Set major channel” command first.)
Example: [SCD0001 selects minor channel 1
[	+CB		TV channel up
[	-CB		TV channel down
[	SDA	000#	Set PIP mode
			0	= OFF
			1	= PIP
			2	= PBP
Example:	[SDA0002 selects PBP

52 Runco CX-52HD/CX-57HD Owner’s Operating Manual