Sony STR-DA90ESG manual Selecting a Component, To listen to or watch Click

Page 24

Playback/Recording

Selecting a Component

You can listen to or watch a connected component by clicking on the component in the on-screen display.

Before you begin, make sure you have:

•Registered the IR codes for the connected components (see pages 17 to 21).

•Turned MASTER VOL on the front panel to the leftmost position (0) to avoid damaging your speakers.

•Set the Auto Play function to ON. (The factory setting is ON, see page 40.)

•Selected the appropriate speaker system (see page 10).

•Set BALANCE on the front panel to the center position.

1Press the button on the remote once or twice to turn on the receiver.

The TV turns on automatically, and the main menu appears. If the TV does not turn on automatically, see pages 17 to 18 to register your TV.

2Click FUNCTION in the main menu.

FUNCTION

SOUND

SETUP

3Click the component you want.

The control buttons appear, then the component turns on and starts playing automatically.

FUNCTION

SOUND

SETUP

VIDEO 1

 

TAPE

VIDEO 2

 

DAT / MD

VIDEO 3

 

CD

L D / DVD

 

TUNER

TV / DBS

 

PHONO

MACRO 1

 

MACRO 2

 

 

EXIT

To listen to or watch

Click*1

TV programs*2 or video tapes

VIDEO 1, VIDEO 2

 

or VIDEO 3

 

 

Laser Discs (LD) or DVD

LD/DVD

 

 

TV programs (only for Sony TV

TV/DBS

with TV OUT jacks) or Digital

 

Broadcasting Satellites (DBS)*2

 

 

 

Digital Audio Tapes (DAT) or

DAT/MD

MiniDiscs (MD)

 

 

 

Compact Discs (CD)

CD

 

 

Radio programs*3

TUNER

 

 

Records

PHONO*4

Analog audio tapes

TAPE

 

 

*1 If you connect the component to jacks other than those specified in the table, click the appropriate one according to your connection (e.g., If you connect the LD player to the VIDEO 3 jacks, click VIDEO 3 to watch the LD).

*2 For details about watching TV or controlling a DBS receiver, see page 26.

*3 For details about tuning radio stations, see page 27. *4 Control buttons do not appear when you select

PHONO.

4Use MASTER VOL + or – on the remote to adjust the volume.

To adjust the volume of the TV's speakers, use the volume control on the TV.

To operate the selected component, click the control buttons. For details of the functions of the control buttons, see the instructions of the selected component. To display other control buttons for the selected component, click SUB.

 

INPUT

SUB

USER

 

0

( )

p

P =

+

Control buttons

To turn off the selected component

Click in the bottom left corner. To turn on the component, follow steps 1 to 3.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents FM Stereo FM-AM Receiver Precautions Table of contents About This ManualAbout the color system for video input Understanding How the Receiver WorksAustralian model Hookup Overview Before you get startedConnecting an outdoor antenna Extend the FM wire antenna horizontallyAdjust the direction Infrared IR Repeater Hookups‚ signal flow Audio Component HookupsWhat cords will I need? CD to CD playerSpeaker System Hookups Speaker placement You can connect an active wooferFor even more powerful amplification Selecting the speaker systemSelecting the impedance TV-VCR Hookups What cables will I need?Monitor to TV or monitor Video 1, 2 to VCRDigital Component Hookups Video 3 Input to a video camera or a video gameLD/DVD in Optical to DVD player CD Optical in to CD player LD/DVD AC-3 RF to LD playerTV/DBS Optical in to TV/DBS tuner DAT/MD Optical Inout to DAT or MD deckConnecting the AC power cord Before using for the first timeAC Hookups Using the Remote Battery lifeInserting batteries into the remote USA and Canada Inserting batteries into the remote AustraliaHow to use the remote To make the on-screen display disappearRegistering a TV or Monitor IR code registration is unnecessaryFollowing case Erasing TV IR codes Registering Audio and Video Components IR code registration is unnecessary in the following caseRegistering IR codes Receiver jacks Component to be connectedClick the respective component Click the manufacturer of the component youErasing IR codes To erase all the IR codesSpecifying the Speaker Type Adjusting the speaker volume Selecting a Component To listen to or watch ClickTo turn off the selected component To turn off all components To mute the soundTo listen to digital program sources You can play video and audio components at the same timeWatching TV or Video Programs Tuning and Presetting Radio Stations Tuning radio stations by scanning stations Automatic TuningPresetting the radio stations Tuning preset stations Preset TuningTo change a preset station To recall preset stations from the SUB menuRecording Recording to audio tape or MDTo stop recording To control the recorder after recordingRecording other components to video tape Recording TV programs to video tapeUsing the Pre-programmed Sound Fields Sound fields Genre Mode Surround effectIll. a Virtual Enhanced Surround a For Rear SP BehindWhen playing a source encoded with discrete information Selecting the sound fieldsWhile playing a component, click Sound in the main menu To turn off the sound fieldsAdjustable sound parameters Customizing the Sound FieldsAdjusting the equalizer parameter To start adjustment with a flat equalizer curveTo reset the equalizer to the factory settings Repeat steps 4 to 5 as necessaryAdjusting the delay time Adjusting surround sound parameters except for delay timeClick Setup in the main menu, then click Delay Hints for adjusting the parameters Wall material simulation WallRegistering Desired Components User IR setting To register a specific IR codeClick Code Clear in the User IR Code Setting menu IndexingTo erase all the User IR codes Starting a Component Automatically at Power On Auto Start To cancel the Auto Start functionClick Auto Play on or OFF Setting the sequence of IR codes Starting a Macro PlayClick Macro 1 or To erase an entered IR codeAdjusting the Sensitivity of the Remote Changing the Display SettingsSelecting the display parameters Adjusting the position of the on-screen display Using the Sleep Timer Operating a CD ChangerSleep appears in the upper left corner of the main menu You can also freely specify the timeIndexing a CD Grouping CDsTo remove the CD from one or more groups You can assign the CD to one or more groupSearching for a CD quickly Playback starts automaticallyFront Panel Descriptions 234 5 67890!Á!ª!£!¢ ! !¤ @¥ @ @ @¢ @£ @ª @Á@¼!»!¥Remote Descriptions USA and CanadaAustralia Tape, MD, VCR, LD, DVD fast forwards or rewindsWhen you listen with headphones Playing audio and video components at the same timeTo listen to or watch Select Do ThisTuning and Presetting the Radio Stations To listen to or watch PressIf the component does not turn on To turn off the componentsTo change the video component in step To record other audio on a specific part of videoAdjusting the Sound To adjust the equalizer parametersDigital Recording To select the sound fieldsTo adjust the surround sound parameters Surround SUR parametersSet up parameters Customizing the Receiver OperationsCenter speaker delay Rear speaker delayTo switch the display Dimmer levelTo temporarily cancel the Flasher function Component OperationsTo select another component Sony CD player onlyTroubleshooting Severe hum or noise is heard No sound is heard from the center speakerSurround effect cannot be obtained Radio stations cannot be tunedDigital signal processor section Audio power specificationsAmplifier section FM tuner section AM tuner sectionVideo section GeneralGlossary Page Page Index Y, ZWatching TV/video programs

STR-DA90ESG specifications

The Sony STR-DA90ESG is a high-performance A/V receiver that made waves in the late 1990s, becoming a favorite among audiophiles and home theater enthusiasts. This 5.1-channel receiver is recognized for its robust build quality and an impressive array of features that elevate the home entertainment experience.

At the heart of the STR-DA90ESG is its powerful amplification system. It delivers a continuous 90 watts per channel into 8 ohms, allowing for crystal-clear sound reproduction across a diverse range of audio frequencies. The receiver supports Dolby Digital and DTS formats, enhancing the surround sound experience for movies and music, making it a solid choice for home cinema setups.

One of the standout features of the STR-DA90ESG is its Digital Signal Processing (DSP) capabilities. The receiver includes various sound modes that can be tailored to suit different listening environments. Users can choose from multiple surround simulation settings to create an immersive audio experience, whether during a blockbuster movie or while listening to music.

The receiver is equipped with multiple input options, including six audio inputs and three video inputs, ensuring compatibility with a variety of devices. The inclusion of component video inputs allows for connections to high-definition sources, which was ahead of its time, catering to the evolving consumer landscape of the late 90s. This versatility makes it easy for users to switch between devices seamlessly, enhancing user convenience.

Another defining characteristic of the STR-DA90ESG is its build quality. Sony has a longstanding reputation for creating durable and reliable products, and this receiver is no exception. The solid chassis helps reduce vibrations and electromagnetic interference, which contributes to better sound quality overall.

In terms of user interface, the receiver offers a straightforward LED display and an intuitive remote control that facilitates easy navigation through settings and adjustments. The ability to store custom sound settings also adds a personal touch to the listening experience.

Overall, the Sony STR-DA90ESG stands as a testament to the brand's commitment to quality audio and video performance. Its blend of powerful amplification, versatile connectivity, and user-friendly features makes it a timeless choice for those looking to enhance their home entertainment setup. Even years after its release, the STR-DA90ESG remains a respected component in the realm of audio and home theater systems.
Top Page Image Contents