Sony STR-DA90ESG manual Adjusting the Sound, Digital Recording, To select the sound fields

Page 52

Front Panel Operations (Remote Short-cuts: USA and Canada only)

Digital Recording

EXAMPLE: Recording a CD using a DAT deck.

See your DAT or CD player’s instruction manual if you need help.

1Turn FUNCTION to select DAT/MD, then press INPUT MODE repeatedly to select “DIGITAL (OPTICAL)”.

2Turn FUNCTION to select CD, then press INPUT MODE repeatedly to select “DIGITAL (OPTICAL)”.

3Insert a blank digital audio tape into the DAT for recording.

4Start recording on the DAT, then start playing the CD you want to record.

Note

You cannot record the digital signal from a Dolby Digital (AC-3) program source.

Adjusting the Sound

The adjusted sounds are stored automatically.

To select the sound fields

For the on-screen operations, see page 33.

Press GENRE repeatedly to display the sound fields genres, then press MODE repeatedly to display the sound fields mode. For the list of sound fields, see page 31.

To turn off the sound fields

Press SOUND FIELD.

To adjust the equalizer parameters

For the on-screen operations, see page 35.

1Start playing a component, then select the sound field you want to adjust.

2Open the control panel and press EQUALIZER CH repeatedly to select Front (F), Center (C) or Rear (R).

3Press EQUALIZER BAND repeatedly to select Bass (BASS) or Treble (TREBLE).

4Use digital processing control buttons (B/b) to adjust the level, then use (V/v) to select the frequency (Hz) and use (B/b) to adjust the frequency. Repeat until you obtain the sound you desire. You can adjust the level ± 10 dB in 0.5 dB steps.

Front speaker bass adjustment

Level : F: BASS 0dB

Frequency : F: BASS 250Hz

Front speaker treble adjustment

Level : F: TREBLE 0dB

Frequency : F: TREBLE 2.5kHz

Center speaker bass adjustment

Level : C: BASS 0dB

Frequency : C: BASS 250Hz

Center speaker treble adjustment

Level : C: TREBLE 0dB

Frequency : C: TREBLE 2.5kHz

Rear speaker bass adjustment

Level : R: BASS 0dB

Frequency : R: BASS 250Hz

Rear speaker treble adjustment

Level : R: TREBLE 0dB

Frequency : R: TREBLE 2.5kHz

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents FM Stereo FM-AM Receiver Precautions Table of contents About This ManualUnderstanding How the Receiver Works About the color system for video inputAustralian model Hookup Overview Before you get startedConnecting an outdoor antenna Extend the FM wire antenna horizontallyAdjust the direction Infrared IR Repeater Hookups‚ signal flow Audio Component HookupsWhat cords will I need? CD to CD playerSpeaker System Hookups Speaker placement You can connect an active wooferSelecting the speaker system For even more powerful amplificationSelecting the impedance TV-VCR Hookups What cables will I need?Monitor to TV or monitor Video 1, 2 to VCRVideo 3 Input to a video camera or a video game Digital Component HookupsLD/DVD in Optical to DVD player CD Optical in to CD player LD/DVD AC-3 RF to LD playerTV/DBS Optical in to TV/DBS tuner DAT/MD Optical Inout to DAT or MD deckBefore using for the first time Connecting the AC power cordAC Hookups Using the Remote Battery lifeInserting batteries into the remote USA and Canada Inserting batteries into the remote AustraliaHow to use the remote To make the on-screen display disappearIR code registration is unnecessary Registering a TV or MonitorFollowing case Erasing TV IR codes Registering Audio and Video Components IR code registration is unnecessary in the following caseRegistering IR codes Receiver jacks Component to be connectedClick the respective component Click the manufacturer of the component youErasing IR codes To erase all the IR codesSpecifying the Speaker Type Adjusting the speaker volume To listen to or watch Click Selecting a ComponentTo turn off the selected component To turn off all components To mute the soundTo listen to digital program sources You can play video and audio components at the same timeWatching TV or Video Programs Tuning and Presetting Radio Stations Tuning radio stations by scanning stations Automatic TuningPresetting the radio stations Tuning preset stations Preset TuningTo change a preset station To recall preset stations from the SUB menuRecording Recording to audio tape or MDTo stop recording To control the recorder after recordingRecording other components to video tape Recording TV programs to video tapeUsing the Pre-programmed Sound Fields Sound fields Genre Mode Surround effectIll. a Virtual Enhanced Surround a For Rear SP BehindWhen playing a source encoded with discrete information Selecting the sound fieldsWhile playing a component, click Sound in the main menu To turn off the sound fieldsAdjustable sound parameters Customizing the Sound FieldsAdjusting the equalizer parameter To start adjustment with a flat equalizer curveTo reset the equalizer to the factory settings Repeat steps 4 to 5 as necessaryAdjusting surround sound parameters except for delay time Adjusting the delay timeClick Setup in the main menu, then click Delay Hints for adjusting the parameters Wall material simulation WallRegistering Desired Components User IR setting To register a specific IR codeIndexing Click Code Clear in the User IR Code Setting menuTo erase all the User IR codes To cancel the Auto Start function Starting a Component Automatically at Power On Auto StartClick Auto Play on or OFF Setting the sequence of IR codes Starting a Macro PlayClick Macro 1 or To erase an entered IR codeChanging the Display Settings Adjusting the Sensitivity of the RemoteSelecting the display parameters Adjusting the position of the on-screen display Using the Sleep Timer Operating a CD ChangerSleep appears in the upper left corner of the main menu You can also freely specify the timeIndexing a CD Grouping CDsTo remove the CD from one or more groups You can assign the CD to one or more groupSearching for a CD quickly Playback starts automaticallyFront Panel Descriptions 234 5 67890!Á!ª!£!¢ ! !¤ @¥ @ @ @¢ @£ @ª @Á@¼!»!¥Remote Descriptions USA and CanadaAustralia Tape, MD, VCR, LD, DVD fast forwards or rewindsWhen you listen with headphones Playing audio and video components at the same timeTo listen to or watch Select Do ThisTuning and Presetting the Radio Stations To listen to or watch PressIf the component does not turn on To turn off the componentsTo change the video component in step To record other audio on a specific part of videoAdjusting the Sound To adjust the equalizer parametersDigital Recording To select the sound fieldsTo adjust the surround sound parameters Surround SUR parametersSet up parameters Customizing the Receiver OperationsCenter speaker delay Rear speaker delayTo switch the display Dimmer levelTo temporarily cancel the Flasher function Component OperationsTo select another component Sony CD player onlyTroubleshooting Severe hum or noise is heard No sound is heard from the center speakerSurround effect cannot be obtained Radio stations cannot be tunedAudio power specifications Digital signal processor sectionAmplifier section FM tuner section AM tuner sectionVideo section GeneralGlossary Page Page Y, Z IndexWatching TV/video programs

STR-DA90ESG specifications

The Sony STR-DA90ESG is a high-performance A/V receiver that made waves in the late 1990s, becoming a favorite among audiophiles and home theater enthusiasts. This 5.1-channel receiver is recognized for its robust build quality and an impressive array of features that elevate the home entertainment experience.

At the heart of the STR-DA90ESG is its powerful amplification system. It delivers a continuous 90 watts per channel into 8 ohms, allowing for crystal-clear sound reproduction across a diverse range of audio frequencies. The receiver supports Dolby Digital and DTS formats, enhancing the surround sound experience for movies and music, making it a solid choice for home cinema setups.

One of the standout features of the STR-DA90ESG is its Digital Signal Processing (DSP) capabilities. The receiver includes various sound modes that can be tailored to suit different listening environments. Users can choose from multiple surround simulation settings to create an immersive audio experience, whether during a blockbuster movie or while listening to music.

The receiver is equipped with multiple input options, including six audio inputs and three video inputs, ensuring compatibility with a variety of devices. The inclusion of component video inputs allows for connections to high-definition sources, which was ahead of its time, catering to the evolving consumer landscape of the late 90s. This versatility makes it easy for users to switch between devices seamlessly, enhancing user convenience.

Another defining characteristic of the STR-DA90ESG is its build quality. Sony has a longstanding reputation for creating durable and reliable products, and this receiver is no exception. The solid chassis helps reduce vibrations and electromagnetic interference, which contributes to better sound quality overall.

In terms of user interface, the receiver offers a straightforward LED display and an intuitive remote control that facilitates easy navigation through settings and adjustments. The ability to store custom sound settings also adds a personal touch to the listening experience.

Overall, the Sony STR-DA90ESG stands as a testament to the brand's commitment to quality audio and video performance. Its blend of powerful amplification, versatile connectivity, and user-friendly features makes it a timeless choice for those looking to enhance their home entertainment setup. Even years after its release, the STR-DA90ESG remains a respected component in the realm of audio and home theater systems.
Top Page Image Contents