Sanyo LCE-24C100F(S), LCE-24C100F(N) Picture Menu TV/AV/HDMI Mode, Picture Menu PC Mode

Page 12

MENU OPERATION

COLOUR SYSTEM

The setting for colour system is only active in TV or AV mode. Usually, the colour system is set to the position of "AUTO". In case of abnormal colour, repeatedly press POINT ◄► buttons to select "AUTO", "PAL", "SECAM", "NTSC" or "NTSC4.43" until the best colour effect is reached.

SOUND SYSTEM

The setting for sound system is only active in TV mode. Usually, the sound system is set to the position of "B/G". In case of abnormal sound, repeatedly press POINT ◄► buttons to select "D/K", "I", "M" or "B/G" until the best sound effect is reached.

SKIP

This feature is used to remove unwanted channels from the channel scanning memory. You can skip the unused or undesired channels when you are

selecting a channel using CHANNEL UP/DOWN (▲▼) buttons. This function is only active in TV mode.

CHANNEL SWAP

To swap the channels between two stored programme positions.

1

Press MENU button to display the main menu.

2

Enter into "CHANNEL" menu, press POINT ▲▼ buttons to select CHANNEL SWAP.

3

Press POINT ◄► buttons or ENTER button to enter into the CHANNEL SWAP menu. Press

 

POINT ▲▼ buttons to select the CURRENT CHANNEL or TARGET CHANNEL, then press

POINT ◄► buttons to select the swap channel. And then press POINT ▲▼ buttons to select SWAPPING item, then press POINT ◄► buttons or ENTER button to select "OK".

Press BACK button to return to the previous menu.

Press MENU button or wait for 5~60 seconds to exit menu operation.

Note:

When enter into CHANNEL SWAP menu again, TARGET CHANNEL will be turn to 0.

CHANNEL

AUTO SEARCH

 

 

 

 

SEMI-AUTO SEARCH

 

 

 

 

MANUAL SEARCH

 

 

 

 

COLOUR SYSTEM

 

AUTO

 

SOUND SYSTEM

 

B/G

 

SKIP

 

 

OFF

 

CHANNEL SWAP

 

 

 

 

 

 

 

 

 

 

: SELECT

: ADJUST

 

: BACK

 

: EXIT

 

 

 

 

 

 

 

 

 

 

 

 

CHANNEL

CHANNEL SWAP

CURRENT CHANNEL

12

TARGET CHANNEL

16

SWAPPING

 

: SELECT : ADJUST : BACK : EXIT

PICTURE

1

Press MENU button and the main menu will appear. Press POINT ◄► buttons to select

 

"PICTURE", and will display PICTURE menu.

2

Press POINT ▲▼ buttons or ENTER button to enter into PICTURE menu.

3

Press POINT ▲▼ buttons to select the item desired.

4

Press POINT ◄► buttons to adjust the item.

Press BACK button to return to the previous menu.

Press MENU button or wait for 5~60 seconds to exit menu operation.

PICTURE MODE: Used for selecting "STANDARD", "VIVID", "SOFT", "PERSONAL" or "DYNAMIC".

CONTRAST: Used to decrease and increase contrast.

BRIGHTNESS: Used to adjust darken and brighten image.

COLOUR: Used for lighten and darken colour. (Only in TV/AV/HDMI mode).

TINT: Used to obtain proper colour.

SHARPNESS: Used for soften and sharpen the image. (Only in TV/AV/HDMI mode).

COLOUR TONE: Used for selecting colour temperature. Select "NORMAL", "WARM" or "COOL".

GAMMA: This function is used for adjusting the gamma value to obtain a better balance of contrast. Select "LOW", "MIDDLE", or "HIGH".(Only in TV/AV/HDMI mode).

COLOUR-R:Used to lighten and deepen red tone. (Only in PC mode).

COLOUR-G:Used to lighten and deepen green tone. (Only in PC mode).

COLOUR-B:Used to lighten and deepen blue tone. (Only in PC mode).

Note:

"TINT" cannot be selected except for NTSC/ NTSC4.43 system.

Only COLOUR TONE and GAMMA are available when SPORTS mode is ON.

CHANNEL

CHANNEL SWAP

CURRENT CHANNEL

12

TARGET CHANNEL

16

SWAPPINGOK

: SELECT : ADJUST : BACK : EXIT

PICTURE MENU (TV/AV/HDMI MODE)

 

 

 

 

 

PICTURE

PICTURE MODE

 

STANDARD

CONTRAST

 

 

 

 

 

 

BRIGHTNESS

 

 

 

 

 

 

COLOUR

 

 

 

TINT

 

 

 

 

 

 

SHARPNESS

 

 

 

 

 

 

COLOUR TONE

 

NORMAL

GAMMA

 

LOW

: SELECT : ADJUST : BACK : EXIT

12

PICTURE MENU (PC MODE)

 

 

 

 

 

PICTURE

PICTURE MODE

 

STANDARD

CONTRAST

 

 

 

 

 

 

BRIGHTNESS

 

 

 

 

 

 

COLOUR TONE

 

NORMAL

COLOUR - R

 

 

 

COLOUR - G

 

 

 

 

 

 

COLOUR - B

 

 

 

 

 

 

: SELECT : ADJUST : BACK : EXIT

Image 12
Contents LCE-24C100FK LCE-24C100FN LCE-24C100FR LCE-24C100FS Important Information Safety Instructions Safety Precautionƒ OFF HdmiCare for Using LCD TV PreparationPart Names and Functions Connecting LCD TV Installing & Uninstalling Stand BaseConnecting AC Power Cord Connecting a Computer Connecting Video Equipment & AerialOperation of Remote Control Remote Control Batteries InstallationNo Signal Shut OFF Basic OperationPlug & Play Selecting Input SourceChannel Recall Channel SelectionVolume Control Sound ModePicture Mode Sports ModeMenu Operation ChannelChannel Menu Auto Search MenuPicture Menu TV/AV/HDMI Mode Picture Menu PC ModePicture Timer Timer MenuTimer SoundSetup Setup PC ModeSetup Menu Input MenuDealer Mode Dealer ModeCleaning LCD TV Function of Product Safety FeatureMusic Mode Setup ResetTroubleshooting PowerVesa Dpms PAL/SECAM/NTSC/NTSC4.43Signal Mode Column Recommended Part No 1AA6P1P5969-- Z5YJ UE7-D