Dealer Mode

AUTO ADJUST: Press POINT ◄► buttons, and the TV automatically detects incoming signal, and adjust itself to optimize its performance. If the image is not displayed properly, a manual adjustment is required (Refer to following adjustments).

H-POSITION:The horizontal picture position will be moved to the left side by pressing POINT ◄ button. And it will be moved to the right side by pressing POINT ► button. (0~100).

V-POSITION:The vertical picture position will be moved down side by pressing POINT ◄ button. And it will be moved up side by pressing POINT ► button. (0~100).

PHASE: Eliminate disorder from the image. Press POINT ◄► buttons to adjust PHASE. (0~100).

CLOCK: Eliminate flicker from the image. Press POINT ◄► buttons to adjust CLOCK. (0~100).

AUTO SHUT DOWN: Press POINT ◄► buttons to set AUTO SHUT DOWN ON or OFF. When PC is switched Off, ''NO SIGNAL'' appears for 30 seconds, TV will be automatically switched to Backlight off mode. During Backlight Off Mode within 10 minutes, TV will be switched to On Mode if PC is switched On. After Backlight Mode continues for 10 minutes, it will be switched to Standby Mode. During Standby mode, TV will not be switched to On mode even if PC is switched On. During Backlight Off mode, POWER indicator will become green.POWER ON/OFF button, NUMERIC (0-9) buttons and CHANNEL up/down buttons are enabled to switch On TV.

DEALER MODE

TO DISPLAY DEALER MODE:

Press INFO button on remote control while holding MENU button on Side control to display Dealer mode menu.

The Dealer Mode has 9 different modes: VOLUME LOCK, TUNING LOCK, START MODE, OSD, RC, AC POWER MODE, START VOLUME LEVEL, MUSIC MODE SETUP and RESET.

Take the way of setting VOLUME LOCK for example:

1	Press POINT ◄► buttons to select a maximal volume.
2	Press INFO button on remote control while holding MENU button on Side control to display
	Dealer mode menu.

SETUP

CHILD LOCK		ON
ECO		OFF
DYNAMIC AI		ON
ACTIVE CONTRAST		OFF
PC ADJUST
SHOP MODE

: SELECT	: ADJUST	: BACK	: EXIT

SETUP

PC ADJUST

AUTO ADJUST
H - POSITION
V - POSITION
PHASE
CLOCK
AUTO SHUT DOWN			ON
: SELECT	: ADJUST	: BACK	: EXIT

AUTO ADJUST

3	VOLUME LOCK will be the default selection. (When you adjust others, press POINT ▲▼
	buttons to select the item desired.)
4	Press POINT ◄► buttons to select "ON". (The maximal volume is the set value by step 1.)
5	Press menu button to exit menu operation.

REMOTE CONTROL

INFO button

VOLUME LOCK

This function is used to limit the maximal volume.

TUNING LOCK

The way to prevent user from executing the Tuning function.

START MODE

The LCD TV will automatically enter to the setting mode while being turned on. You can select OFF, TV(0-10), AV1, AV2(DVD), HDMI or PC in START MODE. When it is set "OFF", it will

keep the mode before being turning off.

OSD

When it is set "OFF", Corresponding OSD cannot display on the screen while operating.

You can set "ON" or "OFF" in RC MODE. Use this feature to set Remote Control Function including Power ON/OFF function.

●ON

-Set Remote Control to normal function.

●OFF

-Set buttons on the Remote Control to prohibit to use include Power button.

AC POWER MODE

You can set "STAND", "LAST" or "ON" in AC POWER MODE.Use this feature to set TV condition when AC cord plug-in.

●STAND

-When AC cord plug-in, LCD TV always STAND-BY.

●LAST

-When AC cord plug-in, the LCD TV will depend on last TV condition. (ON or Stand-by)

●ON

-When AC cord plug-in, LCD TV always ON.

START VOLUME LEVEL

You can select "OFF" or "1-100" in START VOLUME LEVEL.

Use this feature to set volume bar level position every time TV turned on.

Note:

Even Start Volume Level set to higher value then Volume Lock, the Start Volume Level value automatically set to Volume Lock value.

POINT ▲/▼/◄/►

buttons

SIDE CONTROL

MENU button

DEALER MODE MENU

	DEALER MODE
VOLUME LOCK		OFF
TUNING LOCK		OFF
START MODE		OFF
OSD		ON
RC		ON
AC POWER MODE		STAND
START VOLUME LEVEL		OFF
MUSIC MODE SETUP
RESET
: SELECT	: ADJUST	: EXIT