Getting STARTED-POWER Connection / Channel Search

GETTING STARTED—POWER CONNECTION / CHANNEL SEARCH

POWER CONNECTION

5 Plug in AC power cord

(120V AC, 60 Hz).

6 Press the POWER key. (Follow the on-screen instructions.)

To 120V AC outlet.

INITIAL CHANNEL SEARCH

7Press the CHANNEL ▲ (Up) key to search for signals connected to the Antenna terminal.

Channel Search will check for Antenna and Cable signals. If Antenna signals are detected, the HDTV searches for both analog and digital off-air channels. If Cable signals are detected, the HDTV will search for analog Cable channels.

Channels are stored in Channel Memory and can be scanned using the CHANNEL ▲ (Up) and ▼ (Down) keys.

If no Antenna signals are detected, the HDTV will begin an AV search.

If neither of these searches detected a valid signal, the HDTV will tune to input Video1.

CHANNEL SEARCH DISPLAY

AV SEARCH

NOTE:Be sure all the external video devices you con- nected to the HDTV are powered ON before you begin an AV Search.

8 Press the CHANNEL ▼ (Down) key to search for signals from devices you con- nected to the AV input jacks (Initial Display).

AV Search will begin checking the AV inputs for valid signals, beginning with input Video1. When a valid signal is detected, the search process ends and the HDTV tunes to that input source.

If a valid signal is not detected on any of the AV inputs, the HDTV will tune to input Video1.

INITIAL DISPLAY

AV SIGNAL SEARCH DISPLAY

Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032