MENU OPERATION (TV/ AV mode)
COLOUR SYSTEM
The setting for colour system is only active in TV or AV mode.
Usually, the colour system is set to the position of "AUTO". In case of abnormal colour, repeatedly press POINT Ż Ź buttons to select "AUTO", "PAL", "SECAM", "NTSC" or "NTSC4.43" until the best colour effect is reached.
SOUND SYSTEM
The setting for sound system is only active in TV mode.
Press POINT Ż Ź buttons repeatedly to select "D/K", "I", "M" or "B/G" until the best sound effect is reached.
SKIP
This feature is used to remove unwanted channels from the channel scanning memory.
You can skip the unused or undesired channels when you are selecting a channel using POINT Ÿź but- tons.
This function is only active in TV mode.
The settings for sound system, colour system or skip are automatically memorized in the programme position.
CHANNEL SWAP
To swap the channels between two stored programme positions.
1 | Press MENU button to display the main menu. |
2 | POINT Ż Ź buttons to select "CHANNEL", and will display |
CHANNEL menu. Press POINT Ÿź buttons to select | |
| CHANNEL SWAP. |
3 | Press POINT Ż Ź buttons to enter into the Channel Swap |
| menu. Press POINT Ÿź buttons to select the CHANNEL or |
TARGET CHANNEL, then Press POINT Ż Ź buttons to set the swap channel. And then press POINT Ÿź buttons to select SWAPPING item, then press POINT Ż Ź buttons to select "OK".
Ŷ Press BACK button to return to the previous menu.
Ŷ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 29) to exit menu operation.
25