Sanyo LCD-32CA9S, LCD-42CA9S, LCD-37CA9S owner manual PC Adjust

Ŷ Press BACK button to return to the previous menu.

Ŷ Press MENU button or wait for 5~60 seconds (refer to "DURATION" on page 29) to exit menu operation.

ECO

This function can automatically adjust panel's brightness by ambient brightness.

Press POINT Ż Ź buttons to set "ON" or "OFF".

CHILD LOCK

When CHILD LOCK is set "ON", the Side Control buttons will be locked except for POWER ON/OFF button .

PC ADJUST

This function is used to adjust the position of image displayed on screen. It can be selected when the LCD TV could be received PC signal and in PC mode. (Refer to "SIGNAL MODE COLUMN" on page 38.)

Press POINT Ż Ź buttons to enter PC SCREEN menu. It can be select "AUTO", "H-POSITION", "V-POSITION", "CLOCK" or "PHASE" to adjust.

AUTO ADJUST

Press POINT Ż Ź buttons, and the TV automatically detects incoming signal, and adjust itself to optimize its performance. If the image is not displayed properly, a manual adjustment is required (Refer to following adjustments).

H-POSITION

The horizontal picture position will be moved to the left side by pressing POINT Ż button. And it will be moved to the right side by pressing POINT Źbutton. (0~100)

V-POSITION

The vertical picture position will be moved down side by pressing POINT Ż button. And it will be moved up side by pressing POINT

Źbutton. (0~100)

CLOCK

Eliminate flicker from the image. Press POINT Ż Ź buttons to adjust CLOCK. (0~100)

PHASE

Eliminate disorder from the image. Press POINT Ż Ź buttons to adjust PHASE. (0~100)

SCREEN MENU

ECO

CHILD LOCK

PC ADJUST