APPENDIX
CONFIGURATIONS OF VGA TERMINALS
VGA IN
Connect video output terminal of LCD TV to this terminal with VGA Cable (not supplied). When connecting Macintosh computer, the MAC Adapter (not supplied) is required.
Pin Configuration |
|
| 1 | Red Input | 9 | No Connect | |||
|
| 2 | Green Input | 10 | Ground (Vert.sync.) | ||||
|
|
|
|
|
| ||||
|
|
|
|
|
| 3 | Blue Input | 11 | Sense 0 |
5 | 4 | 3 | 2 | 1 |
| 4 | Sense 2 | 12 | Sense 1 |
10 | 9 | 8 | 7 |
| 6 | 5 | Ground (Horiz.sync.) | 13 | Horiz. sync. |
15 | 14 | 13 | 12 | 11 |
| 6 | Ground (Red) | 14 | Vert. sync. |
|
|
|
|
|
| ||||
|
|
|
|
|
| 7 | Ground (Green) | 15 | Reserved |
|
|
|
|
|
| 8 | Ground (Blue) |
|
|
MAC ADAPTER (NOT SUPPLIED)
Set slide switches as shown in the table below depending on RESOLUTION MODE that you want to use before you turn on LCD TV and computer.
Slide Switches
ON
ON DIP
1 2 3 4 5 6
OFF
| 1 | 2 | 3 | 4 | 5 | 6 |
13" Mode (640x480) | ON | ON | OFF | OFF | OFF | OFF |
16" Mode (832x624) | OFF | ON | OFF | ON | OFF | OFF |
19" Mode (1024x768) | OFF | ON | ON | OFF | OFF | OFF |
|
|
|
|
|
|
|
SIGNAL MODE COLUMN (recommended)
This LCD TV can correspond to the signals below. After connecting with the computer, LCD TV can auto- matically recognize the signal from the connected PC( computer)/ HDMI.
PC SIGNAL MODE COLUMN (recommended)
Note:
ƔIn case LCD TV can not display properly due to the connecting cable or the graphic hardware, please make adjustments about phase, clock and so on.
ƔIn principle, LCD TV can not display the signal mode which not described in the above column. But sometimes it can display a signal very similar with one of the signal described.
ƔIf you want to change the definition and colour of PC, please select one from the column.
ƔIt is not the trouble of LCD TV if interference appears on the picture while switching the signal mode.
ƔIt is different from CRT Monitor that it is no blink of the picture when the
ƔThe Dot Clock of the computer's signal must be less than 100 MHz.
ƔSpecifications are subject to change without notice.
In case of the following things, some messages will display on the screen.
Ɣ When the input signal from PC is out of the display range, "Out of range " will display.
38