Getting STARTED-CONTROLS and Jacks

LEFT-SIDE

PANEL

BACK-SIDE

PANEL

Power key

Channel keys

Volume _ +keys

Menu key

Input key

Video 2 input keys

VIDEO

VIDEO 2

INPUT

Component Video Input VIDEO3 (YPbPr), PAGE 9 - Connect digital video equipment to the Video Green (Y), Blue (Pb), Red (Pr) jacks, and matching Audio White (L) and Red (R) jacks. These jacks will automatically detect the type of signal being received.

S-Video Input (VIDEO1), PAGE 9 - To enhance video detail use the S-Video jack instead of the Video jack, if available on your external equipment. (An S-Video connection will override a connection to the Video1 input jack.)

Stereo Audio Out (L/R) Jacks, PAGE 11 - Connect stereo audio equipment to these jacks.

Analog / Digital Antenna Input, PAGE 6 - Connect an RF antenna or Analog Cable system to this jack.

Digital Audio Output (Coaxial), PAGE 11 - Use a Phono-Type (Coaxial) Digital Audio Out Cable to connect Digital Audio Output to an advanced stereo home theater system equipped with Dolby® Digital.

AV Input (VIDEO1 or VIDEO2), PAGE 9 - Connect

analog video equipment here.

PC Input (15-Pin Monitor and Mini STEREO

AUDIO), PAGE 12 - Connect computer and audio outputs to these terminals.

•MONITOR RGB (D-SUB)

•AUDIO R/L (Stereo Mini Jack)

Service port - For service use only, Used for updating the television’s firmware.

HDMI Input (INPUT1, INPUT2 or INPUT3), PAGE 11 - An all digital AV interface that accepts uncompressed video signals for the very best picture possible. HDMI supports HDCP copy protection, allowing transmission of copy-protected digital content. The signal can also include Dolby® Digital or PCM audio, when available.