Sanyo AVM-32F4, AVM32F9 warranty Mts, Using MTS Button, Using Sound Menu, Receiving signal

SOUND ADJUSTMENT

MTS

USING MTS BUTTON :

Your TV set incorporates an MTS (Multichannel Television Sound) decoder to receive stereo broadcasts and any accompanying SAP (Second Audio Program) such as another language

SOUND ADJUSTMENT

MTS

USING SOUND MENU :

sound track).

1. Press the MTS button

Depending on the audio signal type of the currently receiving broadcast, on-screen selection appears as follows:

1

MENU

PICTURE

SOUND

TIME

Press	the MENU button. Move			the
cursor	to SOUND by		pressing the CH
/		buttons and	press the	VOL	+
button.

Receiving signal

Stereo and SAP

Stereo or SAP

On-screen selections
	STEREO	SAP	MONO
STEREO		MONO/SAP	MONO

SETUP

FUNCTION

LANGUAGE : ENGLISH

: SEL. + : ENTER : EXIT

Mono

MONO only

2

SOUND

Move the cursor to MTS by pressing the

The "	", "	" symbols indicate that MTS mode is being broadcast.
		STEREO symbol (RED color)
		SAP symbol (RED color)
When the power is switched on or channel is changed, the "			", "	" symbols are
automatically displayed, depending on the current
broadcast.

SOUND : STANDARD EQUALIZER

HEADPHONE

BALANCE : 0

SURROUND : OFF

MTS: STEREO

: SEL. + : SET	:
		PREV.

CH / buttons.

TV 2

NOTES

3 Press the VOL	+button.
Whenever this button is pressed, the mode will change as follows.
		STEREO	SAP	MONO

If the received signal is weak, noise may be heard.

In such a case, press MTS button to set to the MONO mode for better sound reception. If the received SAP signal is weak, the SAP will not be heard.

Even if both STEREO and SAP broadcasts are received, both broadcasts cannot be heard at the same time.

Transmission of CABLE TV signals may differ from off-air TV broadcasts.

SOUND

SOUND : STANDARD EQUALIZER

HEADPHONE

BALANCE : 0

SURROUND : OFF

MTS: STEREO

: SEL. + : SET	:
		PREV.

SOUND

SOUND : STANDARD EQUALIZER

HEADPHONE

BALANCE : 0

SURROUND : OFF

MTS: SAP

: SEL. + : SET	:
		PREV.

26 27