PICTURE-IN-PICTURE PIP AVM-32F9 only, Pip

PICTURE-IN-PICTURE (PIP) AVM-32F9 ONLY

In this mode, you can enjoy viewing two programs at the same time.

NOTE

Your TV set must be connected to a VCR for PIP to function.

PIP

MAIN		Press PIP on the remote control. When it is ON, the PIP
		Press PIP on the remote control. When it is ON, the PIP
		screen appears in the lower right corner.	Press PIP again
	PIP	to clear the PIP screen from the main screen.

PIP SIZE

PICTURE-IN-PICTURE (PIP) AVM-32F9 ONLY

PIP STILL

Press STILL to freeze-frame the picture.

Press STILL again to resume normal PIP screen.

PICTURE

STILL

MONITORING AV on PIP

1)Press PIP.

2)Press VIDEO to monitor AV source sequentially.

1/4 1/9

Press SIZE to increase or decrease the PIP screen size.

TV	AV 1	AV 2	AV 3
TV	AV 1	AV 2	AV 3

PIP	POSITION

PIP		PIP


PIP		PIP

Press POSITION Key on the remote control unit and the position of PIP changes as shown.

STROBE

Press STROBE for frame by frame movement.

1) PIP is divided into 9 screens, and each displays the movement one frame per second.

(eg.) If you want to take a close look at the batting form of a baseball player, press STROBE. Nine PIP screens will display the movement frame by frame in one second intervals.

2) Press STROBE or PIP to clear the function.

PIP	SWAP WITH MAIN SCREEN

MAIN

PIP

Press SWAP to replace main screen with PIP contents.

NOTE

PIP can not function when blocking is on.