OTHER FUNCTIONS
OTHER FUNCTIONS
BLUE BACKGROUND
When there is no picture signal or the signal is weak, the screen reverts to a solid blue color.
|
| FUNCTION |
|
BLUE BACK | : OFF | ||
CCD | : OFF | ||
TILT | : 0 | ||
BLOCKING |
| ||
| : SEL. + : SET | : PREV. | |
|
| FUNCTION |
|
BLUE BACK | : ON | ||
CCD | : OFF | ||
TILT | : 0 | ||
BLOCKING |
| ||
| : SEL. + : SET | : PREV. | |
CCD :
This TV set incorporates a CCD (Closed Caption Decoder) to enable viewing closed captions and TEXT broadcasts.
Closed caption and TEXT each has 2 channels (CH1 & CH2).
Closed caption and TEXT information can only be viewed if they are being broadcast by a television station, or contained in a videotape or videodisc.
Press the CCD button to select CCD mode.
OFF 
CCD1 
CCD2 
TEXT1 
TEXT2
CAPTION OPERATION AND CHARACTERISTICS :
Disable this feature to watch very weak signals.
CCD (Closed Caption Decoder) |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| OFF | CCD1 | CCD2 | TEXT1 | TEXT2 |
|
| ||||||
You can select closed caption mode. |
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
| ||||
Press CCD button on the remote control to change selections as follows : |
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| FUNCTION |
|
|
|
|
|
|
| FUNCTION |
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| ||||
| BLUE BACK | : OFF |
|
| BLUE BACK | : OFF |
| ||||||||
| CCD | : OFF |
|
| CCD |
| : CCD 1 |
| |||||||
| TILT | : 0 |
|
|
|
| TILT |
| : 0 |
|
| ||||
| BLOCKING |
|
|
|
|
| BLOCKING |
|
|
|
| ||||
|
| : SEL. + : SET | : PREV. | * Refer to page 33 (CCD) |
|
| : SEL. + : SET | : PREV. |
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
TILT COMPENSATION
If you notice a slight tilt of the picture (caused by a geomagnetic effect) you can
compensate for it:
Press VOL+ to tilt to the left.
Press VOL- to tilt to the right.
TILT TO THE LEFT | NORMAL | TILT TO THE RIGHT |
32
After the set is turned on, caption signals will be displayed on screen (if broadcast) in about 10 seconds. Once activated, the television will always remain in caption mode unless deactivated by the CCD button.
Captions appear on screen in various positions where they will least interfere with the picture. Generally captions will be displayed at the top or bottom of the screen.
It is common to see unusual characters or misspelled words appearing in the caption. This is especially true during a live broadcast as captions are created while the program is in progress.
NOTES
When any function is displayed on screen, captions cannot be seen. Captions will reappear after display disappears.
Errors will occur in captioning if the signal is weak or the videotape/videodisc is poorly recorded. A videotape that has been recorded over numerous times can also cause caption malfunction.
QUICK VIEW Button :Press Q.VIEW button on the remote control. The previously viewed channel will appear on the screen. Press Q.VIEW again to switch back to the original channel.
Repeatedly pressing Q.VIEW switches between these two channels.
DISPLAY BUTTON :Press DISPLAY button on the remote control. The channel number of the program you are viewing, the TIMER settings and the current time are displayed in sequence.
The current time remains displayed on the screen, until DISPLAY button is pressed again.
MUTE BUTTON :Press MUTE button on the remote control. The sound of the TV program being viewed will be reduced to zero and "MUTE" will appear on the screen.
To restore normal sound, press MUTE again.
NOTE : Changing the audio volume also restores the sound.
WIDE BUTTON : |
|
| This function lets you select between wide and normal screens. |
Wide | 16 | : | 9 |
Normal | 4 | : | 3 |
33