Dish Network DishPVR 721, 121150 manual Press this button to open the Main Menu

TV/VIDEO BUTTON

If you connect the receiver with its back panel TV ANTENNA/CABLE IN and TV SET OUT ports, use this button to switch the receiver between the satellite signal (connect it to the SATELLITE IN port) and another video signal like a cable or broadcast TV antenna input (connect it to the receiver’s TV ANTENNA/CABLE IN input).

Note: If you connect the receiver to other devices with the phono (RCA) jacks or the S-VIDEOoutput, you must use the TV menus to change the input from local broadcast TV to satellite TV.

POWER BUTTONS

Press the blank POWER button to turn the receiver on or off. The POWER light on the receiver’s front panel turns on to show the receiver is on, and turns off to show it’s off.

MENU BUTTON

Press this button to open the Main Menu.

PAGE UP AND PAGE DOWN BUTTONS

Press the PAGE UP button or the PAGE DOWN button to scan, page by page, through the Program Guide, a Themes list, a Favorite List, an Event Timers list, or a list of channels.

Note: An “event” is any satellite program.

12 121150