7.To check the remote control address, press and hold the SAT mode button for three seconds. Then, let go of the SAT button, and press the POUND (#) button twice. The SAT mode button flashes the same number of times as the address you entered in step 3.
8.Press the SELECT button to close the
Important System Information screen.
SWITCH BETWEEN TV AND DEVICE VOLUME CONTROL
When you set up the remote to control a TV, the MUTE and VOLUME buttons control the TV volume. However, if you want to use the AUX mode to control a tuner or amplifier and the device has a volume setting, you can set up the remote to control the device’s volume instead of the TV volume.
To set the remote to control the device’s volume:
1.Press and hold the AUX mode button
for three seconds, and then let go of it. The AUX mode button will blink.
2.Press the POUND (#) button.
3.Press the plus (+) side of the VOLUME button.
4.Press the 0 number button.
5.Press the POUND (#) button.
The AUX mode button flashes three times.
6.Press the SAT mode button.
7.Press the plus (+) and minus
The device’s volume changes and the AUX mode button lights instead of the TV mode button.
10 | 121150 |