REMOTE CONTROL MODES
REGULAR MODES
You can set the remote to four different modes to control the receiver or other devices.
Set up the remote to control a device like a TV or a VCR. See Set Up the Remote Control on page 6 for what to do.
Note: The remote comes already set up to control the receiver, unless you have changed the address on your receiver.
Use the remote control’s mode buttons, SAT (“satellite” receiver), TV, VCR (for a VCR or a DVD player), and AUX (“auxiliary,” for a cable TV box, a tuner, a second TV, a second VCR, a DVD player, or an audio amplifier) to set the remote to the right mode for the device. To change the mode, press the button for the device you want the remote to control. The mode button stays lit for two seconds to show you’ve set the remote to that mode.
LIMITED MODE
You can program your remote control in limited mode to keep from accidentally changing the channel on your TV or VCR. When you use the remote to control your TV in limited mode, you will only be able to use the POWER, MUTE, and VOLUME buttons. Also, when you use the remote to control your VCR in limited mode, you will only be able to use the POWER and VCR function buttons.
The section Set Up the Remote Control has a step that tells the remote control to go into limited mode.
Note: Limited mode is not used with cable boxes or amplifiers.
121150 | 5 |