Instructions | Additional Information |
2Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.
3For AUX mode only. Press 0 for a second TV, or 1 for a second VCR, or 2 for a
tuner, or amplifier. Then press the STAR (*) button.
4Press POWER.
5Press the UP or DOWN ARROW repeatedly until the equipment turns off.
6Press POUND (#).
7Turn the equipment back on and try some other but- tons to make sure they work.
For example, hold TV for a TV until all of the other mode buttons light. When you let go, TV will flash.
This step is for programming which kind of equipment that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 4.
This puts your remote in the scan mode.
As you press the UP or DOWN ARROW, the remote tries each
code in the memory to see if it can turn off your equipment. When the equipment turns off, you have found a code that
might work.
Note: The mode button for the equipment will flash rapidly eight times when you’ve scanned all the codes for that equipment.
The mode button flashes three times if you have entered the code correctly. This stores the code you found.
Press POWER to turn the equipment back on. Try some other buttons to make sure they work. Sometimes POWER works when other buttons don’t.
5