Instructions | Additional Information |
8If necessary, repeat this procedure until you’ve tried all the codes.
You may need to repeat the scan to find the best code for your equipment.
SWITCHING BETWEEN TV AND AMPLIFIER VOLUME CONTROL
When you set up the remote to control a TV, the MUTE and VOLUME buttons control the TV volume, even if your remote control is in SAT mode. However, if you want to use the AUX mode to control a tuner or amplifier that has a volume setting, you can set up the remote to control the equipment’s volume instead of the TV volume while your remote control is in SAT mode. Follow the instructions in the left column. To change back to controlling the TV volume in SAT mode, follow the instructions in the right column.
Control Amplifier Volume | Control TV Volume |
1Press and hold the AUX mode button for three sec-
onds, and then let go of it. The AUX mode button will blink.
2Press the POUND (#) but- ton.
3Press the plus (+) side of the VOLUME button.
4Press the 0 number button.
5Press the POUND (#) but- ton.
The AUX mode button flashes three times.
MAKE SURE THE REMOTE CONTROLS THE AMPLIFIER’S VOLUME:
6Press the SAT mode but- ton.
1Press and hold the TV mode button for three sec-
onds, and then let go of it. The TV mode button will blink.
2Press the POUND (#) button.
3Press the plus (+) side of the VOLUME button.
4Press the 0 number button.
5Press the POUND (#) button.
The TV mode button flashes three times.
MAKE SURE THE REMOTE CONTROLS THE TV’S VOLUME:
6Press the SAT mode but- ton.
6