Audio Delay
Specifies the amount of additional audio delay after matching video delay. When the change is under one and a half frames, the change in audio delay will be applied without interrupting audio. When changing audio delay more than a frame and a half at a time, there will be a slight audio glitch.
Video Delay
Reports the current amount of video delay in ms.
Reset Frame Sync
Resets the frame sync, clearing any buffered audio and video. You must reset the framesync after manipulating the horizontal and vertical offset in order
Audio Submenu
Menu Structure |
|
| Parameter Type | ||
Aud | Embd | Grp1 | Enbl |
| Embedded Group Enable |
|
|
| Ch01- | Src | Output Source |
|
|
| Ch04 | Gain | Output Gain |
|
|
| (x4) | Pol | Output Polarity |
|
| Grp2 | Enbl |
| Embedded Group Enable |
|
|
| Ch05- | Src | Output Source |
|
|
| Ch08 | Gain | Output Gain |
|
|
| (x4) | Pol | Output Polarity |
|
| Grp3 | Enbl |
| Embedded Group Enable |
|
|
| Ch09- | Src | Output Source |
|
|
| Ch12 | Gain | Output Gain |
|
|
| (x4) | Pol | Output Polarity |
|
| Grp4 | Enbl |
| Embedded Group Enable |
|
|
| Ch13- | Src | Output Source |
|
|
| Ch16 | Gain | Output Gain |
|
|
| (x4) | Pol | Output Polarity |
| AES | Ch01- | Src |
| Output Source |
|
| Ch16 | Gain |
| Output Gain |
|
| (x16) | Pol |
| Output Polarity |
| Tone |
| Tone Frequency | ||
Embedded Group Enable
Enables or disables the embedding of a particular embedded audio group. Disabling a group preserves the settings of the channels belonging to that group.
Output Source
Because the cards audio system functions like a router, each output can be sourced from any input channel. This parameter lets you choose from the many different sources. Here is an explanation of the different source names:
Source Name | Description |
AeXX | Discrete AES channel XX (1 through 16) |
AnX | Analog Audio channel X (1 through 8) |
TgX | Test Generator channel X (1 through 4) |
Page 16 of 28 | 9034 Owner’s Manual • (V 2.0) |