Cobalt Networks 9034 Frame Sync, AES Audio, Out 1/2 7/8, Menu Format Description Tone, Generator

Menu	Item	Format	Description
	Framesync Enable	On/Off	Enables the Frame Sync
	Horizontal Offset	0-4125 samples	Applies additional
			horizontal offset
	Vertical Offset	0-1124 lines	Applies additional vertical
			offset
	Minimum Latency	3-1124 lines	Selects the minimum lines
	Lines		of latency allowed.
Frame Sync
	Minimum Latency	0-27	Selects the minimum
	Fields		fields of latency allowed.
	Framesync Status	On/Off/Error	Shows the status of the FS
			Resets the FS and its
			buffers. Re-establishes
	Reset Framesync	Confirm	audio video sync after a
			adjusting the horizontal
			and vertical offsets.

Menu	Item	Format	Description
	Source	AES 1-16	Selects the source for the
			AES outputs. Each AES
		Analog 1-8
	(per channel)		source can be chosen
		Silence
			separately.
AES Audio	Gain		Gain applied to AES
		Range (-400) - 400	audio output.
Out 1/2 - 7/8	(per channel)
	Phase	Normal	Inverts the phase of the
			AES audio output.
	(per channel)
		Invert

Menu	Item	Format	Description
Tone	Tone Generator 1-4	Range 50Hz –16KHz	Selects the frequency of
Generator	Frequency		the tone generated.

	Menu	Item	Format		Description
		Parameter Save	Confirm		Saves the parameters as
					preset.
	Presets	Parameter Load	Confirm		Loads parameters
					previously saved.
		Restart Parameters	Confirm		Will load factory presets
		to Factory Default			and overwrite the save.
Page 20 of 28				9034 Owner’s Manual • (V 2.0)