![](/images/new-backgrounds/1273164/27316431x1.webp)
Description of Hardware
LED Indicators
The CPE includes seven LED status indicators on the top panel. The LEDs are detailed in the following figure and table.
LED | Description |
PWR | ON: Power is on. |
| OFF: Power is off. |
OPT | ON: Fiber link is up. |
| OFF: Fiber link down. |
TEST | ON: Loopback test in progress. |
| OFF: No loopback test (normal mode). |
PoE | ON: PoE is enabled on the LAN port. |
| OFF: PoE is disabled on the LAN port. |
Link | ON: UTP port link is up. |
| Flashing: UTP port is transmitting or receiving data. |
| OFF: UTP port link is down. |
100M | ON: UTP port is operating at 100 Mbps. |
| OFF: UTP port is operating at 10 Mbps. |
FULL | ON: UTP port is operating in |
| OFF: UTP port is operating in |
16