Zenith S2898A, C27H26B, 206-3923 Memorizing channels, continued, English, Automatic memory tuning

Memorizing channels (continued)

NOTES:

•Memorizing channels is best accomplished during evening “PRIMETIME” hours, as more stations are broadcasting digital signals. Memorizing channels can only be accomplished while a station is broadcasting a digital signal to set that channel into memory.

•If you are unsure of the digital channels available in your area you may visit www.antennaweb.org to receive a list based on your address or zip code. Should you require further assistance you may call our toll-free customer service line at 1-888-865-3026.

•New digital channels may be added to your area periodically, it is recommended that you perform the “AUTO CH MEMORY” procedure regularly.

Automatic memory tuning

1 Press MENU/ENTER. The menu screen will appear.

2 Press or to select (SETUP) menu, then press or to select “AUTO CH MEMORY”.

3 Press . The TV will begin memorizing all the channels available in your area.

After finishing Analog Tuning, Digital Tuning starts automatically.

•It may take from 15 minutes to 30 minutes to complete memorizing

digital cable channels. Depending on the reception condition, a BAR display may not advance for several minutes.

To add or delete channels (ANALOG MODE)

1 Press ANALOG/DIGITAL to select the analog mode.

2 Press MENU/ENTER. The menu screen appears.

3 Press or to select	(OPTION)
menu, then press or	to select
“ADD/DELETE”.

4 Press . The ADD/DELETE menu appears.

5 Select the desired channel to be memorized or deleted using or .

6 Press or to select “ADD” or “DELETE”.

7 Repeat steps 5-6 for other channels you want to add or delete.

8 Press MENU/ENTER repeatedly until the menu screen is cleared. Otherwise, press EXIT to return to the normal screen immediately.

ENGLISH

15