TV operation, English, To select analog channels

TV operation

NOTES:

•If a channel is selected that is not broadcasting, the sound will automatically be muted.

•If a station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.

•It may take a few seconds for a digital channel picture to appear on screen after being selected.

1 To turn on the TV, press POWER.

2 Adjust the volume level by pressing VOL

+or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so do the number of bars. If the volume decreases, the

number of green bars also decreases.

3 Set the TV/CABLE menu option to the
3 Set the TV/CABLE menu option to the	TV	- VHF/UHF channels
appropriate position (see page 14).	CABLE - CABLE TV channels
4 Press the Direct Channel Selection
4 Press the Direct Channel Selection
buttons to select the channel.

To select analog channels

When the TV/CABLE menu option is in the TV position, all channels can be instantly selected by using two buttons. (For example, to select channel 2, press

“0”, then “2”. If you press only “2”, channel selection will be delayed for a few seconds.)

For channels 10 and above, press the 2 digits in order.

When the TV/CABLE menu option is in the CABLE position, channels can be selected as follows:

1-9: Press 0 twice, then 1-9 as needed. Example, to select channel 2, press 002.

10-12: Press 0, then remaining 2 digits. Example, to select channel 12, press 012.

13-99: Press the 2 digits in order.

Example, to select channel 36, press 36. 100-125: Press the 3 digits in order.

Example, to select channel 120, press 120.

To select digital channels

Press the channel number in order.

When “–” is contained in the channel number, press the ﬁrst 3 digits, then press “–/DISPLAY”, followed by the remaining 3 digits. (Example, to select channel 015-001, press 015 – 001.)

•If a channel is selected with only audio content, “AUDIO ONLY” will be displayed on the screen.

•If a channel is selected with a weak digital signal, “DIGITAL CHANNEL SIGNAL STRENGTH IS LOW” will be displayed on the screen.

If the digital channel has the same analog channel, you may be able to watch the same channel with analog.

•If a channel is selected to which you have not subscribed, “DIGITAL CHANNEL IS ENCRYPTED” will be displayed on the screen.

VHF/UHF/CABLE CHANNELS

TV	CABLE
VHF		VHF
2-13		2-13
	STD/HRC/IRC
	14-36	(A) (W)
	37-59	(AA) (WW)
UHF	60-85	(AAA) (ZZZ)
14-69	86-94	(86) (94)
	95-99	(A-5) (A-1)
	100-125 (100) (125)
	01	(5A)

ENGLISH